MPPS V18 module adds support for advanced functions on Marelli ECU’s. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others
Kess V2 Firmware version V3.09 or lower Update to Kess V2 4.036.
Ktag Firmware Version V5.001 or lower Update to Ktag Hardware V6.070.
For ktag label with QC***015 can be updated to V6.07 which cost 240USD;
For ktag label with QC***015 can be updated to V7.003 which cost 345USD.
KTAG V2.10 ECU Programmer with 500 tokens support cars and trucks, merged J-Tag, Motorola BDM/Nexus and Bootloader Mitsubishi/Infineon Tricore/ST communication lines into a single product. Need to disassemble ECU from the car when using KTAG.
Autel MaxiDiag Elite MD802 for 4 System DS model Update Online can do it all-reads and clears trouble codes on either the basic 4 systems (engine, transmission, ABS and airbag) or all the systems.
Free Update Lifetime
OBD2 Canbus Speed Lock Device For Toyota/Nissan/Lexus/Hyundai is an OBD2 connector speed sensor latch device. It is easy and simple to install, via the vehicle CAN communication protocol to send commands, does not affect any features of the original car, safe and reliable!
Vgate Scan Tool Maxiscan VS890 Multi-language Application layer fully complies with ISO 15031 and is compliant with SAE J1979. VS890 supports a large number of vehicles made by 70 manufacturers.
Kess V2 with coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and Ford J1850. Kess V2 is everything you need to work as a successful tuner at a very affordable price.
Attention: Pleas do not update this tool online. And close the network when install the software and use the device.
Orange5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macrolanguage for writing down protocols, which gives fast and easy capability to add new types of microschemes, precisely meeting manufacturers' requirements to read/write algorithms.
MPPS V13.02 chiptuning interface allows read and write memory from the car computer via the diagnostic connector. Newest MPPS V13.02 supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more.
BDM100 Programmer is a universal ecu reader that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
The MPPS chiptuning interface allows read and write memory from the car computer via the diagnostic connector. Newest MPPS V13.02 supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more.
The OpenPort 2.0 combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.
Cheap BDM FRAME with Adapters Set Fit original FGTECH
Best PCB Alientech KESS V2 V2.37 Tuning Kit Plus V54 FGTech Galletto 4 Master Version
With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and Ford J1850, Kess V2 is everything you need to work as a successful tuner at a very affordable price.
Best PCB Alientech KESS V2 Tuning Kit Plus V54 FGTech Galletto 4 and ECM Titanium 1.61 With 18475 Driver
1. Supported: K-TAG, bdm, BOOT, K-line, CANBUS, etc.
2. It is upgradeable.
3. Read and write most controllers on the market
4. Multi-language: English, French, Italian, Portuguese, Spanish
Car Key Master II 2 supports transponder type read write, key make, image dump generators, pin calculator, and immobilizers. Gambit Programmer can do RFID transponder programming from the immobilizer dump/eeprom of the car, in order to start the vehicle.
UPA USB Programmer V1.3 Main Unit for Sale is a set of New UPA USB Programmer main unit, do not contain Adapters.
