Website Update Notice
BMW ICOM   Kess v2   fvdi2 new update   jlr   anniversary gift   IDS VCM   vxdiag car diagnostic   digiprog3   vvdi   gm tech2
Home - Products - Technical Service - BMW OPS DIS V57 SSS V39 Diagnose and Programming Tool Technical Service
« Go Back

BMW OPS DIS V57 SSS V39 Diagnose and Programming Tool Technical Service

Matched Product
BMW OPS DIS V57 SSS V41 Diagnose and Programming Tool Fit All Computers

BMW OPS DIS V57 SSS V41 Diagnose and Programming Tool Fit All Computers   Item No. SP49-B

Buy it Now: €329.99      Click Here to Shop
BMW OPS works with BMW cars with optical fiber, it supports both diagnosing and programming for BMW cars. BMW OPS works with bmw car models from E65 on. BMW OPS is operated under DIS and SSS, DIS version for hard disk fit all laptops is V57, the version of SSS is V41.
ops-and-gt1.pdf  (3,012.6K)


Here are the information about BMW OPS DIS V57 SSS V39 Diagnose and Programming Tool Technical Service, including BMW OPS model series, GT1 DIS operation Manual, BMW OPS version, BMW OPS vehicle coverage, BMW OPS supported function, BMW OPS language available, How to run BMW OPS and BMW GT1 SSS system. Hope they can help you solve the technical service.

Check the attachment about "BMW OPS model series,BMW OPS,GT1 DIS operation Manuel ".

BMW OPS  Technical FAQ (Frequently Ask Question)
BMW OPS version, BMW OPS vehicle coverage, BMW OPS model series, BMW OPS supported function, BMW OPS language available, How to run BMW OPS and BMW GT1 SSS system
BMW OPS Diagnose and Coding Tool

BMW OPS version
Two version hard disk for this product:
1.Hard disk fit IBM T30: only used with IBMT30, software version is DIS V57,SSS V39. Run faster than the version that fit all laptop.

2.Hard disk fit all laptops- The version is DIS V55 SSS V39
Requirements for computer:
windows XP professional
Min 2GB free space in C: Partition
Min 1.8 GHz CPU
512 MB memory
Support USB 2.0 function

BMW OPS vehicle coverage
On vehicle models from the E65 on, BMW is for the first time using fibre-optic cables as standard for communication between control units. It covers BMW group vehicles from 2005-2009 years that are equiped with optical fiber, BMS GT1 covers the BMW group vechicles before 2005 years that have no optical fibers.

BMW OPS supported function
OPS with DIS system diagnose the following models:Vehicle interface via OBD-II socket:E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, E85, E86, E38(OBD-II), E39(OBD-II ), E46(OBD-II ), E52, E53, R56, R50, R52, R53OPS with SSS system program the following models:(1) Vehicle interface via OBD-II socket:E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, R56, R50, R52, R53(2) MOST compatibility ( multichannel programming):E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, R56, R50, R52, R53

BMW OPS language available
SSS system lauguage: English, Deutsch (German), Turkish, French, Spanish, Italian, Portuguese, Greek, Japanese, Korean

DIS system lauguage: English, Chinese, Korean, Russian and German

How to run BMW OPS and BMW GT1 SSS system
Check “How to run BMW OPS and BMW GT1 SSS system” in the  " Related Download Files".

When using BMW GT1,BMW OPS,BMW Mini OPS HDD with IBM T30, how to switch between DIS Diagnostic Device and SSS32 Diagnostic Device?
Reply: DIS Diagnostic Device and SSS V39 Diagnostic Device both run with DOS system.
1) To run DIS Diagnostic Device, it works automatically.
2) To run SSS V39 Diagnostic Device, see the follows:
A) Open IBM T30, then wait for a while, until IBM T30 screen shows “Boot” words: see the photo:

 B) Press “space” key. Or any key of “up” “down” “left” “right” is ok!
C) Input “bootos”+ 'space” key+ “3”, then press “enter” key.

D) Then the following screen appears.

 E) Then the IBM T30 screen becomes black, then white, until the following screen appears. Now it is ready to run SSS32 Diagnostic Device

Attention: sometimes IBM T30 will restart, if it will, repeat the above-mentioned

SSS Program
Hello, I am trying to install sss progman v39 on a PC but I receive a hardware error shortly at the beginning of the installation. Can somebody point me in the right direction? I am just guessing that some configuration in the bios is not ok. Anyway, my PC in an Athlon XP 2400+ with s3 trio vid card. Everything else in onboard.

 B: Necessary to crack HWVer.dll. Are you trying to install on IBM laptop or just a normal Desktop? Don’t forget to replace HWver.dll again in windows/system32 after installing winxp base.

A: With the replace of that file now it's working. I have never thought that this solution could work. Although, I had another problem but it's ok for now. I had to replace my hard drive because it was only 40G to a bigger one.
I am still receiving an error...  When the installation is finished, and the PC has dopped the DVD from the drive the computer is not responding. I mean the mouse and the keyboard is working but the installation is stopped. See the picture below. Tell me what do you think. PS. I installed SSS a couple of days ago on another PC with no problems. This one is making me crazy.

A: *Did you change HWver after installing Base XP3.1?in windows\system32

*Are you sure HDD is 80GB or bigger?

*Are all drivers for hardware installed and recognized?

B: after the base installation with the help of a linux live CDI copied in c:/windows/system32 the Hwver file. After this the installation has began. My hard drive is 160GB. I don’t know nothing about the drivers, cause the installation is fully automatic (no VMware) Ps. I have 3 DVD-s: 1-base; 2-disk 2; 3-disk 3
How much memory do I need? I tried with 256MB, now I am triing with 1G.

A: Memory doesn’t matter.
You need to change the startup manager in registry.
You must use explorer so you can get in Device manager.

Do you have ERD commander?? With this tool you can edit the registry of windows XP 3.1 base.

B: Yes, I have Erd Commander. Can you please tell me step-by-step what should I do? most importantly in the registry.Thanks, Are there any specific configurations in the PC regarding the hard drive and the DVDROM? I have 1 idea cable, the DVDROM is the master and my hard drive is the slave. I have made some changes and after the base installation the system drops the first DVD and the system is restarting. After this I can do nothing because the system is not recognizing the first DVD.Can somebody point me in the right direction?

A: Use ERD commander to edit registry.

and change the SHELL value in "explorer.exe"
pls save or write down the old value!!!!!!!!!!!!

restart pc.
Now you will see normal windows GUI
log in as Administrator
pass: ++Xs4Progman
Disabable Progman AOS services
now you can enter device manager to install all hardware drivers.
after installing drivers enable Program AOS services and change registry value same as before to start programming installation.

B: Thanks man! Now it's working.

1. Be sure to disable/uninstall anti-virus software

Please note,anti-virus software can flag up BMW OPS software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our BMW OPS software is completely safe and virus free and all other virus scanners confirm this.

If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.

2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.


You can search Technical Service by keyword.
Popular Search
Bookmark It