Home - Products - Technical Service - VVDI2 Commander Key Programmer Full Version for VW/Audi/BMW Update Online User Manual
« Go Back

VVDI2 Commander Key Programmer Full Version for VW/Audi/BMW Update Online User Manual

Matched Product
V5.3.0 Xhorse VVDI2 Key Programmer for VW/Audi/BMW/Porsche/PSA Full version Add BMW FEM/BDC VAG Copy48

V5.3.0 Xhorse VVDI2 Key Programmer for VW/Audi/BMW/Porsche/PSA Full version Add BMW FEM/BDC VAG Copy48   Item No. SV86

Buy it Now: €1,829.27   Free Shipping      Click Here to Shop
Newest VVDI2 update online supports powerful functions 5th IMMO/ BMW OBD/ BMW CAS4+. VVDI2 is a comprehensive locksmith device goes beyond than VVDI in function, connectors and vehicle coverage etc. VVDI2 includes the VVDI2 basic software plus VW/BMW/Porsche software.SV86=SV30+SK97+SK108+SK97-B+SO146
Download

Description



 
************************************************* *********************
*** 2018-03-22 
*** Require firmware V5.2.5 
************************************************* *********************
===== VAG V5.3.0 =====
1. Improvement for prepare MQB dealer key
2. Improvement for MQB keyless GO key learning
3. Improvement for BCM2 dump tool
4. Support write immodata for Audi RB8 type
5. Bgufix for customer request in diagnostic unit
6. Bugfix for MED17/EDC17 online decode PIN/CS
7. Bugfix
 
===== BMW V5.3.0 =====
1. Improvement for FEM/BDC key learn
1. Bugfix
 
===== Porsche V5.3.0 =====
1. Support porsche 911,997, boxster 987 keylearn: Menu->Key Learn->Transponder Key - 911,987, Boxster 987, Cayman
2. Bugfix
 
===== PSA V5.3.0 =====
1. Bugfix
 
===== Transponder Programmer V5.3.0 =====
1. Immobilizer data tool: bugfix for Asia->Suzuki->SX4->2006 93C56
2. Immobilizer data tool: bugfix for America->Jeep->Laredo->2008 uPD70F
3. Immobilizer data tool: bugfix for Euro->Fiat->Grand Punto->93C86
4. Bugfix
 
===== Copy 48 (96 bits) V5.3.0 =====
1. Bugfix
 
===== J2534 V5.3.0 =====
1. Bugfix
 
===== Online Upate Tool V5.3.0 =====
1. Bugfix
 
===== Quick Start V5.3.0 =====
1. Bugfix
 

 
************************************************* *********************
*** 2018-02-02 
*** Require firmware V5.2.5 
************************************************* *********************
===== VAG V5.2.5 =====
1. Bugfix for prepare dealer in MQB platform
2. Bugfix
 
===== BMW V5.2.5 =====
1. Bugfix
 
===== Porsche V5.2.5 =====
1. Bugfix
 
===== PSA V5.2.5 =====
1. Bugfix
 
===== Transponder Programmer V5.2.5 =====
1. Support prepare remote via online
2. Immobilizer data tool: bugfix for Asia->Hyundai->Getz->2007-(95040,95160)
3. Immobilizer data tool: bugfix for Euro->MAN->TGA->25128(25256)
4. Bugfix
 
===== Copy 48 (96 bits) V5.2.5 =====
1. Release a new tool for copy 48(96 bits). This tool can run only with copy 48(96 bits) license.
 
===== J2534 V5.2.5 =====
1. Bugfix
 
===== Online Upate Tool V5.2.5 =====
1. Bugfix
 
===== Quick Start V5.2.5 =====
1. Bugfix
 

VVDI2 latest software version V5.2.1 update
 
************************************************* *********************
*** 2018-01-23 
*** Require firmware V5.2.0 
************************************************* *********************
===== VAG V5.2.1 =====
1. Bugfix for access some MQB(Continental/VDO) instrument
2. Improvement for prepare MQB dealer key: Now we support all original blank key or MQB key made by VVDI
3. Improement for MQB key learning
4. Improvement for autodetct in IMMO4 system
5. Bugfix for spanish language
6. Bugfix
 
===== BMW V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix
 
===== Porsche V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix
 
===== PSA V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix
 
===== Transponder Programmer V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix
 
===== J2534 V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix
 
===== Online Upate Tool V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix
 
===== Quick Start V5.2.1 =====
1. Bugfix

 
 
************************************************* *********************
*** 2018-01-19 
*** Require firmware V5.2.0 
************************************************* *********************
===== VAG V5.2.0 =====
1. Improvement MQB NEC35xx immobilizer/KM function, support following cars:
Audi A3/S3 2014+
Audi Q2
VW Golf7
VW Polo(MQB)
VW Tiguan II
VW Touran II
VW crafter 2017+
VW Passat B8 without virtual cockpit
Skoda Octavia III 2014.07+
Skoda Rapid 2015.06+
Skoda Kodiaq
Skoda Superb III
Seat Ibiza/Ateca/Toledo 2015.06+
 
Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not include
Attention 2: Improvement for prepare dealer key: support original blank key and MQB key made by VVDI
Attention 3: MQB Immobilizer function require extra license. Customer who have copy 48 (96 bit) license will get MQB license for free
Attention 4: Improvement for key learn function
Attention 5: Bugfix for access some MQB instrument
2. Improvement for autodetct in IMMO4 system
3. Add spanish language
4. Bugfix
 
===== BMW V5.2.0 =====
1. Improvement for read ISN from MSx8x ECU, require VVDI2 database file verison V1.0.0
2. Improvement for load MEV17xx EEPROM dump
3. Support change second hand FEM/BDC ISN and make original key working
4. Add spanish language
5. Bugfix
 
===== Porsche V5.2.0 =====
1. Add spanish language
2. Bugfix
 
===== PSA V5.2.0 =====
1. Add spanish language
2. Bugfix
 
===== Transponder Programmer V5.2.0 =====
1. Bugfix for update remote database
2. Bugfix for save points
3. Immobilizer data tool: bugfix for Fiat Ducato 93C56
4. Add spanish language
5. Bugfix
 
===== J2534 V5.2.0 =====
1. Add spanish language
2. Bugfix
 
===== Online Upate Tool V5.2.0 =====
1. Add spanish language
2. Bugfix
 
===== Quick Start V5.2.0 =====
1. Bugfix

 
************************************************* *********************
*** 2018-01-18 
*** Require firmware V5.1.0 
************************************************* *********************
===== VAG V5.1.0 =====
1. Improvement MQB NEC35xx immoblizer/KM function, support following cars:
Audi A3/S3 2014+
Audi Q2
VW Golf7
VW Polo(MQB)
VW Tiguan II
VW Touran II
VW crafter 2017+
VW Passat B8 without virtual cockpit
Skoda Octavia III 2014.07+
Skoda Rapid 2015.06+
Skoda Kodiaq
Skoda Superb III
Seat Ibiza/Ateca/Toledo 2015.06+
 
Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not includ
Attention 2: MQB Immobilizer function support original blank key and MQB key made by VVDI2
Attention 3: part of original blank key not support write data
Attention 4: MQB Immobilizer function require extra license. Customer who have copy 48 (96 bit) license will get MQB license for free
2. Improvement for autodetct in IMMO4 system
3. Add spanish language
4. Bugfix
 
===== BMW V5.1.0 =====
1. Improvement for read ISN from MSx8x ECU, require VVDI2 database file verison V1.0.0
2. Improvement for load MEV17xx EEPROM dump
3. Support change second hand FEM/BDC ISN and make original key working
4. Add spanish language
5. Bugfix
 
===== Porsche V5.1.0 =====
1. Add spanish language
2. Bugfix
 
===== PSA V5.1.0 =====
1. Add spanish language
2. Bugfix
 
===== Transponder Programmer V5.1.0 =====
1. Bugfix for update remote database
2. Bugfix for save points
3. Immobilizer data tool: bugfix for Fiat Ducato 93C56
4. Add spanish language
5. Bugfix
 
===== J2534 V5.1.0 =====
1. Add spanish language
2. Bugfix
 
===== Online Upate Tool V5.1.0 =====
1. Add spanish language
2. Bugfix
 
===== Quick Start V5.1.0 =====
1. Bugfix

************************************************* ************************* 2018-01-06 *** Require firmware V5.0.0 ************************************************ *********************
!!! Update V5.0.0 firmware require use "Upgrade Kit", you can find it from VVDI2 Quick Start from V5.0.0 software !!!
===== VAG V5.0.0 =====
1. Add support for MQB NEC35xx immoblizer/KM function, support following cars:Audi A3/S3 2014+Audi Q2VW Golf7VW Polo(MQB)VW Tiguan IIVW Touran IIVW crafter 2017+VW Passat B8 without virtual cockpitSkoda Octavia III 2014.07+Skoda Rapid 2015.06+Skoda KodiaqSkoda Superb IIISeat Ibiza/Ateca/Toledo 2015.06+
Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not includAttention 
2: MQB Immobilizer function require MQB key made by VVDI2.
2 Bugfix
===== BMW V5.0.0 =====
1. Improvement for read ECU ISN
2. Bugfix
===== Porsche V5.0.0 =====
1. Bugfix
===== PSA V5.0.0 =====
1. Bugfix
===== Transponder Programmer V5.0.0 =====
1. Bugfix
===== J2534 V5.0.0 =====
1. Bugfix
===== Online Upate Tool V5.0.0 =====
1. Bugfix
===== Quick Start V5.0.0=====
1. Add "Upgrade Kit"
2. Bugfix
 

 
************************************************* *********************
*** 2017-12-28 
*** Require firmware V4.8.0 
************************************************* *********************
 
!!!This update no need update firmware
 
===== BMW V4.9.0 =====
1. FEM/BDC support emergency switch ON: FEM/BDC Key Learn->Emergency switch ON
2. Support read ISN from original key(even key was disabled): FEM/BDC Key Learn->Read ISN from original key
3. FEM/BDC support close/open transport mode: FEM/BDC Key Learn->Exchange FEM/BDC->Close/Open transport mode
4. !!!New Function: ECU/CAS ISN!!! (Menu->Key Learn->ECU/CAS ISN)
Support OBD exchange used or new ECU module, no need open PCB
Support OBD exchange used CAS3+/ISTAP module, no need open PCB
Support exchange used or new ECU module with "ECU dump file"
Support exchange used CAS3+/ISTAP, CAS4(1L15Y, 5M48H) with "CAS dump file" 
(1). E-Series
(a). OBD read ECU ISN: MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
(b). OBD read/write ECU ISN: ME17N45(N45 Tricore), ME17N46(N46 Tricore)
(c). OBD read/write ECU ISN: MEV17_2(N12 Tricore), MED17_2(N14 Tricore), MV1722(N16 Tricore), MVD1722(N18 Tricore), MEVD174K(N20, Tricore), MEVD176K(N55 Tricore), MVD1727(N18 Mini Tricore), MEVD17KW(Tricore)
(d). OBD Read/write CAS ISN: CAS3+(0L15Y, 0M23S), ISTAP version. Encrypt verison require working key support
(e). Support write new ISN to ECU flash dump file, fix checksum: MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
(f). Support write new ISN to ECU eeprom dump file, fix checksum: ME17N45(N45 Tricore), ME17N46(N46 Tricore)
(g). Support write new ISN to ECU eeprom dump file, fix checksum: MEV17_2(N12 Tricore), MED17_2(N14 Tricore), MV1722(N16 Tricore), MVD1722(N18 Tricore), MEVD174K(N20, Tricore), MEVD176K(N55 Tricore), MVD1727(N18 Mini Tricore), MEVD17KW(Tricore)
(h). Support write new ISN to CAS3 eeprom dump file, fix checksum: CAS3+(0L15Y, 0M23S), ISTAP version. Encrypt verison require working key support
(2). F-Series(some F-series ECU don't support read ISN from OBDII)
(a). OBD read/write ECU ISN: MEVD1724 (N20 Tricore), MEVD1725 (N13 Tricore), MEVD172Y(N55 Tricore), X63TU(S63TU, N63TU)
(b). Support write new ISN to CAS4(1L15Y) eeprom dump file, fix checksum: CAS4(1L15Y)
(c). Support write new ISN to CAS4(5M48H) eeprom dump file, fix checksum: CAS4(5M48H). Encrypt verison require working key support
(3). Some function in ECU/CAS ISN require download VVDI2 configuration file: Online Update Tool(v4.9.0)->Menu->Software Update and Update Information->Configuration file Update 
5. Support read CAS3+(ISTAP) EEPROM from OBDII(This is not full EEPROM, Support make dealer key, DON'T WRITE this file back to CAS)
6. Bugfix
 
===== Transponder Programmer V4.9.0 =====
1. Support identify MQB(VAG) key
2. Immobilizer data tool: add new for BMW->Motorcycle
3. Immobilizer data tool: bugfix for Subaru->Impreza 1996 68HC05
4. Bugfix for write HITAG EEPROM
5. Bugfix
 
===== Online Upate Tool V4.9.0 =====
1. Add menu for VVDI2 configuration file: Menu->Software Update and Update Information->Configuration file Update 
2. Bugfix


************************************************* *********************
*** 2017-12-04
*** Require firmware V4.8.0
************************************************* *********************
===== VAG V4.8.0 =====
1. Improvement for copy 48 (96 bit). All the custer update to latest V4.8.0 for copy function
2. Improvement for OBD 48 copy. Fixbug for Passat/CC copy funtion, add support copy CDC32xx type in OBD 48 copy
3. Bugfix for some Q3 dashboard in IMMO4 system
4. Improvement for autodetct in IMMO4 system
5. Bugfix

===== BMW V4.8.0 =====
1. Support display FEM/BDC system frequency
2. Support exchange FEM/BDC function, you can exchange second hand FEM/BDC module
3. FEM/BDC system now support 16 key positons
4. Bugfix

===== Porsche V4.8.0 =====
1. Bugfix

===== PSA V4.8.0 =====
1. Bugfix

===== Transponder Programmer V4.8.0 =====
1. Support the latest remotes version produced after 11.2017
2. HITAG(VAG)(VW/Audi IMMO5 key) type, support write EEPROM file while keys is not locked
3. Immobilizer data tool: bugfix for Renault Duster 2010 95040
4. Add garage door remotes: Menu->Transonder-Chip-Remote->Garage Door
5. Bugfix

===== J2534 V4.8.0 =====
1. Bugfix

===== Online Upate Tool V4.8.0 =====
1. Bugfix

===== Quick Start V4.8.0 =====
1. Bugfix
 

Xhorse VVDI2 V4.7.0 latest software version update

VVDI2 V4.7.0 Newest Software Free Download
https://mega.nz/#!zwYHFLwZ!7dJQAZObu84PNYO6OMhgso-GV-tXHe2T2C8Ln2CkIAs


************************************************ ********************
*** 2017-09-29
*** Require firmware V4.7.0
************************************************ ********************
===== VAG V4.7.0 =====
1. Improvement for new NEC+24C64 dashboard after 2014.06, support new VDO dashboard. Now we support following cars:
VW T5 2014.06-2016
VW T6 2015.06-2017
VW Sharan 2014.06-
VW Passat 2014.06-2016
VW Caddy 2014.06-2017
VW Jetta 2014.06-2016
VW Scirocco 2014.06-
VW Tiguan 2014.06-
VW Touran 2014.06-
VW EOS 2014.06-
VW CC 2014.06-2016
VW Golf 2014.06-
VW Amarok 2014.06-
Skoda Yeti 2014.06-
Seat Alhambra 2014.06-
Audi A1 2014.06-
Audi Q3 2014.06-
2. Bugfix

===== BMW V4.7.0 =====
1. Bugfix

===== Porsche V4.7.0 =====
1. Bugfix

===== PSA V4.7.0 =====
1. Bugfix

===== Transponder Programmer V4.7.0 =====
1. Bugfix

===== J2534 V4.7.0 =====
1. Bugfix

===== Online Upate Tool V4.7.0 =====
1. Bugfix

===== Quick Start V4.7.0 =====
1. Bugfix



VVDI2 full software V1.2.6 new update:
 
===== VAG V1.2.6 =====
1. Support copy 48 transponder, without binding condor(Menu->Key Learn->4th Immobilizer system - Copy 48 Transponder)
About copy 48 function on VVDI2:
(1). Authorize copy 48 function require 1000 remote points, require buy an extra emulator
(2). You can exchange it with "Transponder Programmer -> Menu -> Points System"
(3). Every success calculate will cost 100 remote points
(4). Copy 48 fucntion use in 4th immobilizer system(Dashboard), support type: NEC24C32, NEC24C64, NEC24C64 colordisplay, A1, A3/TT/R8, Q3, New tiguan 5ND920873B, 5ND920883B etc
(5). Copy 48 fucntion can work on the car that which support read PIN and CS via OBDII. Ofcourse, known CS and PIN is supported. Support make new key, support add keyless GO keys, especially support lost all key。 For Passat B6/CC only support clone 48 transponder(must have working key), don't support 46 transponder, dont support keyless Go, dont support lost all key
 
1.About points on VVDI Key TOOL, you can combine to your VVDI2 device and used in VVDI2
In future, points will have more power function, save as more as you can!
2. Fixbug for old A6/Q7 J518 read EEPROM bug
3. Bugfix
===== BMW V1.2.6 =====
1. Bugfix
 
===== Porsche V1.2.6 =====
1. Bugfix
 
===== PSA V2.0.7 =====
1. Bugfix 
 
===== Transponder Programmer V1.2.6 =====
1. Points system: Fixbug for verify sub-remote pcb status
2. Bugfix

VVDI2 full version software version v1.2.5 new update:
(2016-11-28)
*** Require firmware V2.2.5
************************************************************************
===== VAG V1.2.5 =====
1. Support copy 48 transponder(Menu->Key Learn->4th Immobilizer system - Copy 48 Transponder)
   (1). Authorize copy 48 function require 1000 remote points, require an extra emulator, every success calculate will cost 100 remote points
   (2). You can exchange it with "Transponder Programmer -> Menu -> Points System"
   (3). Copy 48 fucntion can work on the car that which support read PIN and CS via OBDII. Ofcourse, known CS and PIN is supported
   (4). Support clone key, support make new key, support add keyless GO keys, especially support lost all key. All do via OBDII, DON'T need read EEPROM with programmer
   (5). Mainly use type: NEC24C32, NEC24C64, NEC24C64 colordisplay, A1, A3/TT/R8, Q3, New tiguan 5ND920873B, 5ND920883B etc
2. Add identification for new A6/Q7 J518(this type not support read via OBDII), avoid damage J518 when you read EEPROM via OBDII
3. Bugfix
 
===== BMW V1.2.5 =====
1. Bugfix
 
===== Porsche V1.2.5 =====
1. Bugfix
 
===== PSA V2.0.6 =====
1. Bugfix 
 
===== Transponder Programmer V1.2.5 =====
1. Points System: You can exchange copy 48 function by yourself, require 1000 remote points
2. Special Transponder: Add DongFeng-Succe 1.5L immobox
3. Make Remote: Bugfix for Chevrolet Epica
4. Immobilizer data tool: Toyota Echo ECU 25040 bugfix
5. Immobilizer data tool: Add support SaicMotor Roewe 360 remote immobilizer
6. Bugfix
 
===== J2534 V1.2.5 =====
1. Bugfix 
 
===== Online Upate Tool V1.2.5 =====
1. Bugfix 
 
===== Quick Start V1.2.5 =====
1. Bugfix

 
VVDI2 full version hardware version v2.2.5 new update:

(2016-11-28)
===== Support software version ====
VAG V1.2.5
BMW V1.2.5
Porsche V1.2.5
PSA V2.0.6
Passthru J2534 V1.2.5
Online Update Tool V1.2.5
Quick Start V1.2.5
You can find the detail update information from Readme in newest software, Mainly include:
1. Support copy 48 transponder. Authorize copy 48 function require 1000 remote points, require an extra emulator, every success calculate will cost 100 remote points
2. Bugfix for Chevrolet Epica remote
3. Add identification for new A6/Q7 J518(this type not support


VVDI2 latest update features:
 
 *** 2016-11-16 
*** Require firmware V2.2.3 
************************************************************************
===== VAG V1.2.3 =====
1. Fix bug for lost all key via OBDII: support keyless Go cars
2. Bugfix
 
===== BMW V1.2.3 =====
1. Bugfix
 
===== Porsche V1.2.3 =====
1. Bugfix
 
===== PSA V2.0.5 =====
1. Bugfix 
 
===== Transponder Programmer V1.2.3 =====
1. Fix bug for copy some HITAG2(46) transponder
2. Prepare remote: Add support for Chevrolet Epica
3. Immobilizer data tool: bugfix Skoda fabia 93C86
4. Bugfix
 
===== J2534 V1.2.3 =====
1. Bugfix 
 
===== Quick Start V1.2.3 =====
1. Bugfix


Requirement on Hardware version v2.2.3(2016-11-16)
===== Support software version ====
VAG V1.2.3
BMW V1.2.3
Porsche V1.2.3
PSA V2.0.5
Passthru J2534 V1.2.3
Online Update Tool V1.2.2
Quick Start V1.2.3
You can find the detail update information from Readme in newest software, Mainly include:
1. Fix bug for lost all key via OBDII: support keyless Go cars
2. Prepare remote: Add support for Chevrolet Epica
3. Update remote database


Q: VVDI2 remote function got error code 
vvid2-remote-function-got-error-code

A: Currently about VVDI2 prepare remote function cannot support english database,only Chinese database.still developing this function.



VVDI2 Commander Key Programmer Update Features:

v2.2.3(2016-11-16)
===== Support software version ====
VAG V1.2.3
BMW V1.2.3
Porsche V1.2.3
PSA V2.0.5
Passthru J2534 V1.2.3
Online Update Tool V1.2.2
Quick Start V1.2.3
You can find the detail update information from Readme in newest software, Mainly include:
1. Fix bug for lost all key via OBDII: support keyless Go cars
2. Prepare remote: Add support for Chevrolet Epica
3. Update remote database
 
v2.2.2(2016-10-25)
===== Support software version ====
VAG V1.2.2
BMW V1.2.2
Porsche V1.2.2
PSA V2.0.4
Passthru J2534 V1.2.2
Online Update Tool V1.2.2
Quick Start V1.2.2
You can find the detail update information from Readme in newest software, Mainly include:
1. Support copy transponder: HITAG2(46), 11, 12, 13, 7935(ID42)
 
v2.2.1(2016-09-29)
===== Support software version ====
VAG V1.2.1
BMW V1.2.1
Porsche V1.2.1
PSA V2.0.3
Passthru J2534 V1.2.1
Online Update Tool V1.1.7
Quick Start V1.1.7
You can find the detail update information from Readme in newest software, Mainly include:
1. Addd support for copy remote
2. Add MED17/EDC17 dump tool
 
 
 
 
v2.1.9(2016-09-03)
===== Support software version ====
VAG V1.1.8
BMW V1.1.8
Porsche V1.1.8
PSA V2.0.2
Passthru J2534 V1.1.8
Online Update Tool V1.1.7
Quick Start V1.1.7
You can find the detail update information from Readme in newest software, Mainly include:
1. Prepare remote: support remote points system
 
 
 
v2.1.7(2016-08-10)
===== Support software version ====
VAG V1.1.7
BMW V1.1.7
Porsche V1.1.7
PSA V2.0.1
Passthru J2534 V1.1.7
Online Update Tool V1.1.7
Quick Start V1.1.7
You can find the detail update information from Readme in newest software, Mainly include:
1. Add BMW coding for E series
2. Prepare remote:: support write remote under wireless mode
 
 
v2.1.4(2016-06-03)
===== Support software version ====
VAG V1.1.4
BMW V1.1.4
Porsche V1.0.6
Online Update Tool V1.0.9
Quick Start V1.0.6
Passthru J2534 V1.0.6
VVDI Key Tool V1.0.0
You can find the detail update information from Readme in newest software, Mainly include:
1. Release new software VVDI Key Tool, it support all VVDI2-Transponder programmer functions. For the new added function requires VVDI Key Tool devcie
2. Add new: Guided functions for VAG
3. Support unlock second-hand toyota smart key
4. Update make remote
 
v2.1.3(2016-04-22)
===== Support software version ====
VAG V1.1.3
BMW V1.1.3
Transponder Programmer V1.1.3
Porsche V1.0.5
Online Update Tool V1.0.8
Quick Start V1.0.5
Passthru J2534 V1.0.5
 
You can find the detail update information from Readme in newest software, Mainly include:
1. Add Guided functions for VAG
2. Improved window for File Make Key in BMW
3. Add support fot Hitag3 read/write
 
v2.1.2(2016-01-29)
===== Support software version ====
VAG V1.1.2
BMW V1.1.2
Transponder Programmer V1.1.2
Porsche V1.0.4
Online Update Tool V1.0.8
Quick Start V1.0.5
Passthru J2534 V1.0.4
v2.1.1(2016-1-14)
===== Support software version ====
VAG V1.1.1
BMW V1.1.1
Transponder Programmer V1.1.1
Porsche V1.0.3
Online Update Tool V1.0.8
Quick Start V1.0.5
Passthru J2534 V1.0.4
Software Update and Update Information->Latest Update Information view latest update in detail
Software Update and Update Information->Software Update download latest software
1.Add EWS for BMW Software
2.Fixed Romote Data for Key programer
3.Fix bug for all software
 
v2.1.0(2015-12-12)
Software Update and Update Information->Latest Update Information view latest update in detail
Software Update and Update Information->Software Update download latest software
1.Add new for Porsche Software
2.Fixed IMMO5 programer bug for Audio
3.Fix bug for all software
 
===== Support software version====
VAG V1.1.0
BMW V1.1.0
Transponder Programmer V1.1.0
PassThru J2534 V1.0.4
Porsche V1.0.2
Online Update Tool V1.0.7
Quick Start V1.0.9
 
 
v2.0.6(2015-10-12)
Software Update and Update Information->Latest Update Information view latest update in detail
Software Update and Update Information->Software Update download latest software
===== Support software version ====
VAG V1.0.8
BMW V1.0.8
Transponder Programmer V1.0.8
PassThru J2534 V1.0.3
Online Update Tool V1.0.6
Quick Start V1.0.4
 
v2.0.5(2015-09-19)
Software Update and Update Information->Latest Update Information view latest update in detail
Software Update and Update Information->Software Update download latest software
===== Support software version ====
VAG V1.0.7
BMW V1.0.7
Transponder Programmer V1.0.7
PassThru J2534 V1.0.3
Online Update Tool V1.0.5
Quick Start V1.0.4
v2.0.4(2015-08-27)
Software Update and Update Information->Latest Update Information view latest update in detail
Software Update and Update Information->Software Update download latest software
===== Support software version ====
VAG V1.0.6
BMW V1.0.6
Transponder Programmer V1.0.6
PassThru J2534 V1.0.2
Online Update Tool V1.0.4
Quick Start V1.0.4
 
 
v2.0.3(2015-08-21)
Software Update and Update Information->Latest Update Information view latest update in detail
Software Update and Update Information->Software Update download latest software
===== Support software version ====
VAG V1.0.5
BMW V1.0.5
Transponder Programmer V1.0.5
PassThru J2534 V1.0.1
Online Update Tool V1.0.4
Quick Start V1.0.3
 
===== Mainly update information ====
You can find the detail update information from Readme in newest software, Mainly include:
1. Fix bug for Hitag Programer
2. Support calibration for frequency testing
3. Support VAG ODIS PassThru J2534
 
V2.0.2 (2015-08-15)
Support software version(Get newest software with Software Update):
VAG V1.0.4
BMW V1.0.4
Transponder Programmer V1.0.4
Online Update Tool V1.0.3
 
You can find the detail update information from Readme in newest software, Mainly include:
1. Fix bug for BMW CAS3+ encrypt version make dealer key
2. Fix bug for Immo Data Tool: Porsche make dealer key
3. Add new for Immo Data Tool: Rover Discovery 3
4. Add new for Immo Data Tool: Greate Wall Delphi immobox
 
V2.0.1
Base version

VVDI2 latest software version V5.0.0 update
************************************************* ************************* 2018-01-06 *** Require firmware V5.0.0 ************************************************ *********************
!!! Update V5.0.0 firmware require use "Upgrade Kit", you can find it from VVDI2 Quick Start from V5.0.0 software !!!
===== VAG V5.0.0 =====
1. Add support for MQB NEC35xx immoblizer/KM function, support following cars:Audi A3/S3 2014+Audi Q2VW Golf7VW Polo(MQB)VW Tiguan IIVW Touran IIVW crafter 2017+VW Passat B8 without virtual cockpitSkoda Octavia III 2014.07+Skoda Rapid 2015.06+Skoda KodiaqSkoda Superb IIISeat Ibiza/Ateca/Toledo 2015.06+
Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not includAttention 
2: MQB Immobilizer function require MQB key made by VVDI2.
2 Bugfix
===== BMW V5.0.0 =====
1. Improvement for read ECU ISN
2. Bugfix
===== Porsche V5.0.0 =====
1. Bugfix
===== PSA V5.0.0 =====
1. Bugfix
===== Transponder Programmer V5.0.0 =====
1. Bugfix
===== J2534 V5.0.0 =====
1. Bugfix
===== Online Upate Tool V5.0.0 =====
1. Bugfix
===== Quick Start V5.0.0=====
1. Add "Upgrade Kit"
2. Bugfix
 

VVDI2 latest software version V4.9.0 update
 
************************************************* *********************
*** 2017-12-28 
*** Require firmware V4.8.0 
************************************************* *********************
 
!!!This update no need update firmware
 
===== BMW V4.9.0 =====
1. FEM/BDC support emergency switch ON: FEM/BDC Key Learn->Emergency switch ON
2. Support read ISN from original key(even key was disabled): FEM/BDC Key Learn->Read ISN from original key
3. FEM/BDC support close/open transport mode: FEM/BDC Key Learn->Exchange FEM/BDC->Close/Open transport mode
4. !!!New Function: ECU/CAS ISN!!! (Menu->Key Learn->ECU/CAS ISN)
Support OBD exchange used or new ECU module, no need open PCB
Support OBD exchange used CAS3+/ISTAP module, no need open PCB
Support exchange used or new ECU module with "ECU dump file"
Support exchange used CAS3+/ISTAP, CAS4(1L15Y, 5M48H) with "CAS dump file" 
(1). E-Series
(a). OBD read ECU ISN: MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
(b). OBD read/write ECU ISN: ME17N45(N45 Tricore), ME17N46(N46 Tricore)
(c). OBD read/write ECU ISN: MEV17_2(N12 Tricore), MED17_2(N14 Tricore), MV1722(N16 Tricore), MVD1722(N18 Tricore), MEVD174K(N20, Tricore), MEVD176K(N55 Tricore), MVD1727(N18 Mini Tricore), MEVD17KW(Tricore)
(d). OBD Read/write CAS ISN: CAS3+(0L15Y, 0M23S), ISTAP version. Encrypt verison require working key support
(e). Support write new ISN to ECU flash dump file, fix checksum: MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
(f). Support write new ISN to ECU eeprom dump file, fix checksum: ME17N45(N45 Tricore), ME17N46(N46 Tricore)
(g). Support write new ISN to ECU eeprom dump file, fix checksum: MEV17_2(N12 Tricore), MED17_2(N14 Tricore), MV1722(N16 Tricore), MVD1722(N18 Tricore), MEVD174K(N20, Tricore), MEVD176K(N55 Tricore), MVD1727(N18 Mini Tricore), MEVD17KW(Tricore)
(h). Support write new ISN to CAS3 eeprom dump file, fix checksum: CAS3+(0L15Y, 0M23S), ISTAP version. Encrypt verison require working key support
(2). F-Series(some F-series ECU don't support read ISN from OBDII)
(a). OBD read/write ECU ISN: MEVD1724 (N20 Tricore), MEVD1725 (N13 Tricore), MEVD172Y(N55 Tricore), X63TU(S63TU, N63TU)
(b). Support write new ISN to CAS4(1L15Y) eeprom dump file, fix checksum: CAS4(1L15Y)
(c). Support write new ISN to CAS4(5M48H) eeprom dump file, fix checksum: CAS4(5M48H). Encrypt verison require working key support
(3). Some function in ECU/CAS ISN require download VVDI2 configuration file: Online Update Tool(v4.9.0)->Menu->Software Update and Update Information->Configuration file Update 
5. Support read CAS3+(ISTAP) EEPROM from OBDII(This is not full EEPROM, Support make dealer key, DON'T WRITE this file back to CAS)
6. Bugfix
 
===== Transponder Programmer V4.9.0 =====
1. Support identify MQB(VAG) key
2. Immobilizer data tool: add new for BMW->Motorcycle
3. Immobilizer data tool: bugfix for Subaru->Impreza 1996 68HC05
4. Bugfix for write HITAG EEPROM
5. Bugfix
 
===== Online Upate Tool V4.9.0 =====
1. Add menu for VVDI2 configuration file: Menu->Software Update and Update Information->Configuration file Update 
2. Bugfix

VVDI2 latest software version V4.8.0 update


************************************************* *********************
*** 2017-12-04
*** Require firmware V4.8.0
************************************************* *********************
===== VAG V4.8.0 =====
1. Improvement for copy 48 (96 bit). All the custer update to latest V4.8.0 for copy function
2. Improvement for OBD 48 copy. Fixbug for Passat/CC copy funtion, add support copy CDC32xx type in OBD 48 copy
3. Bugfix for some Q3 dashboard in IMMO4 system
4. Improvement for autodetct in IMMO4 system
5. Bugfix

===== BMW V4.8.0 =====
1. Support display FEM/BDC system frequency
2. Support exchange FEM/BDC function, you can exchange second hand FEM/BDC module
3. FEM/BDC system now support 16 key positons
4. Bugfix

===== Porsche V4.8.0 =====
1. Bugfix

===== PSA V4.8.0 =====
1. Bugfix

===== Transponder Programmer V4.8.0 =====
1. Support the latest remotes version produced after 11.2017
2. HITAG(VAG)(VW/Audi IMMO5 key) type, support write EEPROM file while keys is not locked
3. Immobilizer data tool: bugfix for Renault Duster 2010 95040
4. Add garage door remotes: Menu->Transonder-Chip-Remote->Garage Door
5. Bugfix

===== J2534 V4.8.0 =====
1. Bugfix

===== Online Upate Tool V4.8.0 =====
1. Bugfix

===== Quick Start V4.8.0 =====
1. Bugfix
 

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Technical Service by keyword.
Popular Search
Bookmark It
×
CarTool.co.uk