UK/EU SHIP NO TAX CGDI Prog BMW MSV80 Auto Key Programmer with BMW FEM/EDC Function Get Free Reading 8 Foot Chip Free Clip Adapter

7.Warranty:1 year 

Main Functions of CGDI BMW 

CGDI BMW Functions Introcution and Supported Carlist

1. BMW Car Key Matching Function Introcution

Read key information：Read out the anti-theft information and key information of the vehicle，such as VIN、Anti-theft version、Remote control frequency、Key number, key ID, key type, and key position status.

Generate dealer key: After selecting the blank key bit, click this function to match the new key.

Synchronous ELV: When the steering wheel lock fails; when the key is matched, the car cannot start.

Synchronize DME: When the key is matched, the car cannot be started. Please execute this function to synchronize the DME and CAS system.

Restore key bit: When this key bit is used, it can be initialized.

Unlock key: restore the key to a brand new state, which can be used again.

Disable key: When the owner's key is lost, the relevant key bit can be shielded so that it no longer works on the vehicle.

Enable key: enable the disabled key bit to make the key work on the vehicle again.

Mileage reset: The device can read the mileage information of the anti-theft module, and execute this function to make the mileage become 0.

Exit shipping mode: When the vehicle is diagnosed with this fault code, please execute this function to eliminate the fault code and return the vehicle to normal.

Recovery code：After the car is matched with a new key, there is a failure of no coding file, this function can be used to restore the original coding file.

Replace FEM/BDC/CAS4：When the car module is faulty, use this function to help the vehicle replace the module.

Backup FAFP: Applicable to BMW FEM/BDC modules, backup original FAFP files.

Restore FAFP: Applicable to BMW FEM/BDC module, write the required FAFP file.

Reset starter lock: After replacing the BMW FEM/BDC module, the vehicle does not start, please execute this function.

Remote key repair: When the EEPROM chip on the BMW FEM/BDC module is damaged or the data is lost, causing the key to fail, you can use this function to repair the original car key.

Car key matching supported models List

BMW 1 Series：E81、E82、E87、E88、F20、F21、F52、F40

BMW 2 Series：F22、F23、F44、F45、F46

BMW 3 Series：E36、E46、E90、E91、E92、E93、F30、F31、F34、F35

BMW 4 Series：F32、F33、F36

BMW 5 Series：E34、E39、E60、E61、F07、F10、F11、F18

BMW 6 Series：E63、E64、F06、F12、F13

BMW 7 Series：E38、E65、E66、F01、F02、F03、F04

BMW 8 Series：E31

BMW X1：E84、F48、F49

BMW X2：F39

BMW X3：E83、F25

BMW X4：F26

BMW X5：E53、E70、F15

BMW X6：E71、E72、F16

BMW M2：F87

BMW M3：E90、E92、E93、F80

BMW M4：F82、F83

BMW M5：E60、F10、F90

BMW M6：E63、E64、F06、F12、F13

BMW M8：F91、F92

BMW X3 M：F97

BMW X4 M：F98

BMW X5 M：E70、F85、F95

BMW X6 M：F94

BMW Z3：E36、E37

BMW Z4：E85、E86、E89

BMW Z8：E52

BMW MINI：R50、R52、R53、R54、R55、R56、R57、R58、R60、R61、F54、F55、F56、F60

Porsche：911、Boxster 987

2. Supports reading and writing BMW DME ISN models in OBD mode

B48、B58

MEVD172Y F10 MOTOR  Engine electronics MEVD172 6 Cylinder

MEVD1724 F25 MOTOR  Motor Electronics N20

MEVD1725 F20 MOTOR  Motor Electronics N13

N63TU_R0 F01 MOTOR  Engine electronics MEVD172 8 Cylinder N63TU Master

N63TU_L0 F01 MOTOR2 Engine electronics MEVD172 8 Cylinder N63 TU Slave

S63TU_R0 F10 MOTOR  Engine electronics MEVD172 8 Cylinder S63TU Master

S63TU_L0 F10 MOTOR2 Engine electronics MEVD172 8 Cylinder S63 TU Slave

ME17N45  E87 MOTOR  Motor Electronics N45

MEV17N46 E87 MOTOR  Motor Electronics N46

MED17_2  R56 MOTOR  Motor Electronics

MED17_2N R56 MOTOR  Motor Electronics

MV1722   R56 MOTOR  Motor Electronics N16

MVD1722  R56 MOTOR  Motor Electronics N18H

MEVD174K E84 MOTOR  Engine electronics ME VD17.2.4 4 Cylinder N20

MEVD17KW E70 MOTOR  Motor Electronics N55

MEVD174K E84 MOTOR  Motorelektronik ME VD17.2.9 4 Zylinder N20

MEVD176K E89 MOTOR  Engine Electronics ME VD17.2.6 6 Zylinder N55 Bosch High pressure pump

MEV17_2  R56 MOTOR  Motor Electronics

MSV70    E63 MOTOR  Motor Electronics N52

MEV9N46L E87 MOTOR  Motor Electronics N46

ME9N62   E65 MOTOR  Motor Electronics N62

MEV9N46  E46 MOTOR  Motor Electronics N46

N62_TUE  E65 MOTOR  Motor Electronics N62

N62_TUE2 E65 MOTOR  Motor Electronics N62

MEV9N46L E87 MOTOR  Motor Electronics N46

ME9N62   E60 MOTOR  Motor Electronics N62

MEV9N46L E90 MOTOR  Motor Electronics N45

ME9N62   E60 MOTOR  Motor Electronics N62

MS450DS0 E60 MOTOR  Motor Electronics M54

MS450DS0 E65 MOTOR  Motor Electronics M54

ME9N62_2 Mor MOTOR  Motor Electronics

ME9N62_2 E65 MOTOR  Motor Electronics N62

ME9E65_6 E65 MOTOR  Motor Electronics N62

ME9E65_6 E60 MOTOR  Motor Electronics N62

ME9N45   E87 MOTOR  Motor Electronics N45

ME9N45   E46 MOTOR  Motor Electronics N45

N73_R0   E65 MOTOR  Motor Electronics N73 Master

N73_L0   E65 MOTOR2 Motor Electronics N73 Slave

MSS60    E90 MOTOR  Motor Electronics S65

3. Support the use of CGDI wiring harness to read and write BMW DME ISN models

N13(MEVD17.2.5)

N20(MEVD17.2.4/MEVD17.2.9/MEVD17.2.P)

N55(MEVD17.2/MEVD17.2.6/MEVD17.2.G)

N63/S63(MEVD17.2.8/MEVD17.2.H)

B38(MEVD17.2.3/MEVD17.2.K)

EDC17C06/EDC17C56/EDC17CP02

EDC17C50/EDC17CP49

EDC17CP09

EDC17CP45

MSD80、MSD81、MSD85、MSD87、MSV80、MSV90

4. Support BMW Service function

BMW Diagnosis: read and clear vehicle fault codes, and provide solutions.

BMW E Series Program：Suitable for BMW E series vehicles, read all module information, you can specify a module for programming.

BMW E Series Coding：It is suitable for BMW E series vehicles. It reads all module information, can specify a module for coding, and also supports modification of VO code and activation of hidden functions.

BMW F/G Series Program：It is suitable for BMW F/G series vehicles, reads all module information, can specify a module for programming, and also supports the initialization of airbag/sunroof/window modules.

BMW F/G Series Coding：It is suitable for BMW F/G series vehicles. It reads all module information, can designate a module for coding, and also supports modification of VO code and activation of hidden functions.

5. BMW EGS  Computer repair and replacement

BMW E series: Support 6HP, functions include status detection, reset adaptation, VIN modification and ECU reset.

BMW F series: Support 6HP and 8HP, functions include data backup, erase reset and clear ISN.

6. BMW Data Repair

Support modules include CAS1, CAS2, CAS3, CAS4, FEM and BDC, and can modify frequency, VIN and ISN.

Supported DME models include N13, N20, N55 and B38, and VIN and ISN can be modified.

Support DME_ISN, EWS_ISN, KEY_CODE to calculate each other, used for CAS4 module and FEM/BDC module repair and replacement.

7. BMW CAS mileage reset

Support CAS1, CAS2 and CAS3, modify the mileage to 0.  

8. BMW ICOM function

When this function is executed, the device will automatically register and you can use the original BMW software.

9. BMW EEPROM data read and write

Supports data reading and writing of the anti-theft chip 95128 of BMW FEM module (Free of dismantling)

Supports data reading and writing of the anti-theft chip 95256 of BMW BDC module (Free of dismantling)

Support BMW ELV chip 95040 data read and write (Free of dismantling)

10.Maserati car mileage modification

Support Levante (95320), Geberit (95160), President (95160), OBD mode, no need to disassemble, fast and stable.

11. Other functions

Actively check software and firmware, remind customers to upgrade;

Function classification, online authorization, to help customers quickly locate;

The equipment is automatically activated, breaking the time limit;

Built-in help and operation tutorial to eliminate customers' concerns about operating errors;

Customize and adjust the software interface and font size to meet the habits of each customer.

CG Prog BMW MSV80 Package List

1pc x CG Prog BMW MSV80 Main unit
1pc x Adapter
1pc x USB line
1pc x Reading 8 Foot Chip Free Clip Adapter

CGDI BMW Prog Customer Review:

cas4 F10 – ok (new key)
cas4+ F10 – ok (new key) isn from org key or dump DME
fem/bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
CGDI PROG bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
program bdc key via obd for bmw x6 ok!
add key to bmw x5 successfully
program key to 2016 BMW 5-series ok
program key for BMW 523Li OK
Program BMW FEM all key lost done!
program FEM for F30 328 2013 ok
programing orignal key for BMW 325 ok
add new key to BMW 3 series ok.
program bmw m3 key done!
Cas 2 - E60 2005 lost key - Obd - not working ( no option to program from dump)
Cas 3+ E87 2008 spare key - eeprom dump - ok
F10 - key from dump - OK
F10 LCI - key from dump and isn from working key - OK
F10 LCI - key from dump and isn from DDE - OK
E60 LCI - downgrade CAS3+ and key via OBD - OK

2016 year BMW 5-Series key added successfully by CG BMW

New model X6 BDC done successfully by CG BMW

BMW 5-Series done by CG bmw

FEM all key lost done by CG BMW

CG Prog BMW program X6 BDC key via OBD

CG Prog BMW add key to BMW X5 successfully

CG Prog BMW program key to 2016 BMW 5-Series

CG Prog BMW program key to BMW 523Li

CG Prog BMW FEM all key lost: Done!

CG Prog BMW program FEM BMW F30 328 2013

CG Prog BMW & Mini cooper R56 cas3++ all key lost

BMW X3 added one original key !Done