Lexia-3 PSA XS Evolution works with both Citroen and Peugeot. Lexia-3 is compatible with most of Citroen and Peugeot cars from 1995. Lexia-3 PP2000 Interface support read identification, read fault codes, clear fault codes, auto-scan etc. Multiple language available.
Lexia-3 Lexia3 V48 PP2000 V25 Citroen Peugeot Diagnostic with Diagbox V7.83
NEW UPDATE AVAILABLE!!! Update by CD!!!!
PP2000/LEXIA-3 Interface works for both Citroen and Peugeot!
Diagbox V7.83 Software free provide
Lexia-3 PP2000 Description:
1.It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.
2.It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Lexia-3 PP2000 Function:
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Lexia-3 PP2000 Specification:
1.Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
Lexia-3 Diagbox V7.83 Software Display:
Lexia-3 PP2000 Package list:
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x Instruction for Installation and Activation DVD for PP2000
Protecting you from checkout to delivery.
If you are a buyer using Paypal right now, please check Paypal Buyer Protection and Paypal Returning Cost Refund regulations in advance.
Top 11 Reasons to Choose CarTool.co.uk
1. Professional OBD2 Diagnostic Tools Supplier
2. Market Oriented in UK and European Customers
3. 6-Years Online Store
4. Trustworthy Seller
5. Technical Support Team
6. Best Quality
7. Competitive Price
8. Fast Delivery (DHL,EMS,FedEx,TNT,UPS,AMX,YWEN)
9. Oversea Safety Exporting Certificated
10. 1-Year Guarantee and After-Sale Service for Lifetime
11. Simple & Comfortable Return & Refund Policy
Our Aim at Offering You A Personal, Easy and Convenient Shopping Experience. Welcome to Purchase!
What is the meaning of the QC Mark?
Note: Each device from our company has a unique QC Mark formed by digital numbers.
1. The QC mark means the product has been passed our Quality Department Test.
2. The QC mark shows that the product is supplied from our company
3. The product with the QC mark will be our guarantee.
Fast Free Shipping and Cost-Effective
Lonsdor K518 K518ISE Key Programmer
Whatsapp: +86-199-4763-7411 (Joanna)
http://www.carTool.co.uk & http://m.carTool.co.uk
Scan the QRcode, feel free to contact us on your smartphone.
Lexia 3 PP2000 With Diagbox Software For Citroen/Peugeot Diagnosis Technical Service
Q1: when install Lexia-3 Diagbox software, error message reading “ERROR Lexia: error during installation of Lexia. You have to reactivate to restart the installation.”
A1: Your computer system isn’t compatible with the software; please use Windows XP operation system.
Q2: Does Lexia test the tire pressure?
A2: If your car has Tire pressure control unit, lexia-3 can test the tire pressure.
Q: After plug the USB cable to the Lexia-3 (item NO. SP08-C), the indicator lights flash and off, off and flash, not stable.
A: Is the USB cable also connected with the car? Check whether the USB cable is not connected well with the computer.
Q: yes, I do. I try on several cars, does not work either.
A: try to use another USB cable, if it will not work either, contact us, maybe it needs to return to us for check.
Q4: Does Lexia-3 work with Peugeot 308?
A4: Yes, it does, but which year of your Peugeot 308? Lexia-3 PP2000 works with Peugeot 308 from 1996 to 2008.
Q5: Can Lexia-3 (item NO: SP08-C) work with Peugeot Partner Tepee B9 2011 diesel car?
A5: this car model is included in the supported carlist, so far no users feedback this car is not supported.
Q6: is PPS compatible with Peugeot 307 HDI?
A6: PPS2000 work with Peugeot 307, but it is not compatible with Hybrid Diesel Peugeot only with the gasoline car.
Q7: Can Lexia-3 PP2000 (item NO. SP08-C) work with Peugeot 407 2005, after install the NEW DPF, can I reset DPF counter? After Eolys is full, can I reset Eolys counter?
A7: PP2000 supports Peugeot 407 2005, but the DPF and Eolys are truck or diesel car systems, we haven’t tested it.
Q8: Would you please store the software lexia3 pp2000 and diagbox6.01 in one CD?
A8: No, they are not allowed to store in one CD, they have to be stored them in two different CD, otherwise the software installation will get errors.
Q9: During the installation of Lexia-3, I got ERROR reading “Failure of the activation (error 20).
A9: we are so sorry; we used to store the lexia3 pp2000 software and diagbox v6.01 software in the same one CD, now they are separately stored into two different CD. Please download diagbox V6.01 software at: http://www.chinaautodiag.com/download/diagbox-v6.01-setup.zip and try to reinstall, if it does not work either, contact us we will ship you CD.
Q10: I install diagbox software on Windows XP3, 32BIT, but it can’t communicate with the car, besides, I install PPS software in another computer (Win XP, 32bit, SP3), I successfully active it, but can’t communicate with the car either, what’s the problem?
A10: Try to install Lexia3 software, if lexia3 software can communicate with the car. So it suggests you didn’t install diagbox software properly, or your computer system is not compatible with diagbox software, please you watch the video in the CD, the video shows you how to step-by-step install the software.
Q11: It can do C5 cars?
A11: It is not stable for c5 cars, you'd better not choose this for c5.
Q12: It can be updated?
A12: It is updated by CD.
Q13: I have installed it on windows 7 system, but it cannot work, what is the problem?
A13: It can only be installed on XP system; you need to change another computer with XP system.