Xhorse

Xhorse VVDI RKE BOX Remote Control Switching Box Support 6V/9V/12V

In Stock. History 1 sold. Item No. SK187-B

Buy Now: 29.99
VAG OBD Helper for VW Audi Skoda 4th Immo Data Calculator work with Lonsdor K518ISE and VVDI2Get immo data within 3-5 minutes by connecting the internetMore Hot Sale Items 12.12 Big SaleNeed Help? Whatsapp/Tel: +86-13628647582 (Joanna)
Shipping:
Free Shipping Standard Flat Rate Shipping Service    Estimated delivery time: 7-15 working days.See details?
Weight:
0.2KG
Package:
23cm*17cm*4cm     ( Inch: 9.06*6.69*1.57 )
Returns:
Return for refund within 7 days,buyer pays return shipping. Read details ?

Product Description

Xhorse VVDI RKE BOX is applied at the following aspects:
1. To change the original straight remote control to folding remote
2. No method or apparatus temporarily to add a new remote control
3. Temporary replacement because of the original out of stock
4. Only one remote for the original car (such as the Chinese, Besturn, etc.)
5. To seek low-cost remote control instead of the expensive original one
Note: at least one original remote control for use of the kit
VVDI RKE BOX  Remote Control Switching Box Support 6V/9V/12V
 
1.Power options: connect 3V remote control by default, not any welded joints connection.
If you connect remote control of 6V, 9V or 12V, please take the main box apart and select the corresponding joints showed on the the following image.
Example: To connect 6V remote control,you should just have 6v welded joints connected. 
6v welded sample 1
2. Wiring description:
 
Remove the circuit boards in the original remote control, and connect to the main unit as the right picture shows (connect the white wire to buttons, red to the positive, black to the negative)
Note: 3 kinds of remote button: 2-feet, 4-feet and 5 feet buttons
4-feet and 5-feet buttons: no direction distinction, but it must be soldered at the diagonals
2-feet buttons: no direction distinction, and respectively solder the two feet
6v welded sample 2
6v welded sample 3
 
original remote control
positive
negative 
remote wiring diagram
 
IMPORTANT: Do not reverse the power cord on the remote control
 
2. To get power via OBD or 12V constant power from the car
 
3. Key/ remote matching and clearing
 
Matching steps:
 
Press SET button on the Host box (in the internal hole at the side of unit), then the buzzer beep twice, to go into the matching state
Press any button on the new remote for a while until the buzzer beep continuously. Key matching is completed.
Repeat the previous two steps to add another new key.
Note:
Up to six keys to match for one Host box; the key matching will fail if more
In the matching state, the buzzer beeps once if the key cannot be detected for more than 10 seconds, and then automatically exit the matching state to go into the normal working state.
 
Clearing steps:
 
Press SET button for a while until the buzzer beep continuously. All the keys matched previously are cleared and return to factory state
 
Kindly Note
If the key is lost or not to use, you can erase all the keys and then re-add all lost keys to ensure safety.
6v welded sample 4
 
Buzzer
Key to be added
SET button
 
4. To add the key embryo and anti-theft chip to the remote control
 
Package Including:
 
1pc x VVDI RKE BOX
2pc x key

Protecting you from checkout to delivery.
If you are a buyer using Paypal right now, please check Paypal Buyer Protection and Paypal Returning Cost Refund regulations in advance.


paypal-buyer-protection paypal-refund-for-returning-cost


Top 11 Reasons to Choose CarTool.co.uk
 
  1. Professional OBD2 Diagnostic Tools Supplier
  2. Market Oriented in UK and European Customers
  3. 6-Years Online Store
  4. Trustworthy Seller
  5. Technical Support Team
  6. Best Quality
  7. Competitive Price
  8. Fast Delivery (DHL,EMS,FedEx,TNT,UPS,AMX,YWEN)
  9. Oversea Safety Exporting Certificated
10. 1-Year Guarantee and After-Sale Service for Lifetime
11. Simple & Comfortable Return & Refund Policy

Our Aim at Offering You A Personal, Easy and Convenient Shopping Experience. Welcome to Purchase!


What is the meaning of the QC Mark?
Note:
Each device from our company has a unique QC Mark formed by digital numbers.

1. The QC mark means the product has been passed our Quality Department Test.
2. The QC mark shows that the product is supplied from our company
3. The product with the QC mark will be our guarantee.


Fast Free Shipping and Cost-Effective

Lonsdor K518 K518ISE Key Programmer


Contact Information

Live Support
E-Mail:Sales@carTool.co.uk
Skype:carTool.co.uk
 Whatsapp: +86-136-2864-7582 (Joanna)


carTool.co.uk QRcode:
http://www.carTool.co.uk & http://m.carTool.co.uk

Scan the QRcode, feel free to contact us on your smartphone.


qrCode-carTool

     


 

Buy more and Save more
Customers who viewed this item also viewed