Autel MaxiIM IM608 PRO II (Autel IM608 II) Full Kit Plus IMKPA Accessories with Free G-Box2 APB112 and 2pcs Otofix Smart Watches

1pc x IM608 II Tablet
2pcs x OTOFIX Smart Key Watches

1pc x XP400 Pro Key Programmer

1pc x JVCI+ ECU Reprogrammer

1pc x Carry Case

1pc x Main Cable

1pc x USB Cable (2m)

1pc x Connect Cable

1pc x Mini USB Cable

1pc x AC/DC Adapter (12V)

1pc x AAC001

1pc x APC101 (USB Cable)

1pc x APB129 (EEPROM Adapter)

1pc x APB125 (Mercedes Infrared Collector)

1pc x APB104 (MCU_FQFP64)

1pc x APB105 (MCU_FQFP80)

1pc x APB106 (MCU_FQFP112)

1pc x APB107 (MCU_FQFP144)

1pc x APB108 (MCU_FQFP176)
1pc x APB109

1pc x APA002 (EEPROM Socket)

1pc x APA101 (Signal Cable)

1pc x APA103 (EEPROM Clamp)

1pc x APA107 (ECU Clamp)

1pc x APA108 (MCU Clamp)

1pc x APA109 (MC9S12 Clamp)
1pc x USB to Ethernet Adapter

---

Autel IMKPA Key Programming Accessories Kit to Use with XP400 Pro

Product Description

The IMKPA accessories kit works with the XP400Pro and supports the following functions:
 
Currently supports over 10 key unlock types
BMW EWS3 key learning
Benz NEC key learning
Benz ESL_W209 read/write/erase
Compatible with IM508 and IM608 (XP400Pro required)
Includes 1-Year Warranty


Package includes:
 
1pc x APB113
1pc x APB114
1pc x APB115
1pc x APB118
1pc x APB119
1pc x APB120
1pc x APB121
1pc x APB122
1pc x APB123
1pc x APB126
1pc x APB127
1pc x APB128
1pc x Storage Case
 

---

Product Introduction:
The Autel G-BOX2 accesorry tool is an adapter which is compatible with Autel's IM508 + XP400 programmer and IM608 key programming tablets to aid in programming keys for Mercedes DAS3 CAN EIS/EXS in an AKL(ALL-Keys-Lost) situation.
 
The G-Box2 also supports DME/DDE ISN reading and writing in Boot mode on some BMW vehicles that are applicable. It can be used in Boot mode or Bench method.
 
Product Highlights:
 
Reads and writes Bosch engine ECU on F classis of BMW and MQB of Volkswagen.
Work with the Autel’s advanced diagnostic tablets supporting IMMO and key programming functions.
Program keys for Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL(ALL-Keys-Lost) situation.
Works with Autel IM508+XP400 and IM608, IM608 Pro, Auro IM600 and Auro IM100 with XP400. Note: The functions are NOT universal, please contact us to check before purchase.
Supports DME/DDE ISN Reading and Writing in Boot Mode on BMW vehicles that are applicable.
Reduce the data reading time of ECU W204 and EIS W207 by over 85%; It is not necessary to remove and reinsert the key for W221 and W164 after the 2009 models.
It can be used in Boot mode or Bench method.
Compare with other adapters, it is more effctive to read the ECU data from W204 and W207 EISs.
 

 
Product Functions:
 
Supports Mercedes Benz All Keys Lost, faster to calculate password
Supports IM608 or IM508 with XP400
Used for Faster Mercedes ECU data and EIS password calculation
Mercedes DAS3 can EIS/EZS all keys lost
Reduces reading time of W204 ECU data & W207 EIS by over 85%
No need to remove and reinsert the key for W221 & W164 after 2009 models
Read and write BMW DME/DDE ISN in boot mode
Compatible with Auro IM600 & Auro IM100 with XP400
 
Troubles and Troubleshooting:
 
When all the keys of the Mercedes-Benz vehicle are lost, you can operate via the OBD.
Note: This method is suitable for Mercedes-Benz W204, W207, W216 and W164 EISs after the year 2009.
 
Connection:
 
1. Connect the G-Box2 to the vehicle' s OBDII
2. Remove the fuse of vehicle EIS, connect the Relay ports to the fuse using the supplied fuse cable
3. When the vehicle has an ELV, connect the K7 port and ELV plug using the supplied K-line cable
4. Connect the G-Box2 to the Autel Diagnostic Tablet (MaxiIM IM608, IM508)

How to do in Bench method when all keys of Mercedes-Benz vehicle are lost?
 
Note: This Method is suitable for all Mercedes-Benz EISs that are already supported by Autel diagnostic tablets.
 
Connection:
 
1. Plug the G-Box2 to the Mercedes-Benz EIS using the packed DB15 Cable
2. Plug to the DC port of G-Box2 using a power adapter (DV 12V)
3. Plug the G-Box2 to the Autel diagnostic tablet (MaxiIM IM608, IM508)

Package Includes:
 
1pc x Autel G-BOX2
1pc x DB15 Cable
1pc x K-Line Cable
1pc x Fuse Cable
2pcs x Fuse (5A)
2pcs x Clamp Cable
1pc x OBDII Extension Cable
1pc x Quick Reference Guide
 

---

Autel APB112 Smart Key Simulator Main Unit and USB Cable Set 
 
The APB112 smart key simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the 4D type chip. More key chip types will be supported with future upgrades.

Notice: This is the simple package of Autel APB112 with main unit and usb cable only which can function exactly the same. Just no carton box and user guide (which you can download online too). 
 
Features:
 
1. Smart key simulator
2. Compatible with both IM608 and IM508 (Work with both XP200, XP400 and XP400Pro)
5. 46, 4D data collection
6. 46 smart key password calculation
7. 46 chip simulation
8. Toyota 4D (94/ D4, 98) smart key simulation
9. Toyota H (88/ A8, A9, 39) smart key simulation
10. Collects data from the ignition coil
11. Identify ignition coil troubles
12. Decode vehicle key chip data
13. Simulate vehicle key chip (ex - 4D chip)
14. Must be used with an Autel diagnostic tool
15. Toyota/ Lexus smart key all key lost
16. Chip decoding (Hyundai 46)

How to Use Autel APB112?

Important Notice:
*Before operating or maintaining APB112, please read these instrucstions carefully, pay extra attention to the safety warnings and precautions. 
*Not work alone, but works together with Autel MaxiIM IM608 or Autel MaxiIM IM508.
*Do Not Disconnect the USB Cable when use it

1. Connect the APB112 Smart Key Simulator to Autel Diagnostic Device using the supplied USB cable.
2. After connection, the status indicator lights solid blue,indicating that the APB112 Smart Key Simulator is working properly and then automatically communicates with the Diagnostic Device.
3. The APB112 Smart Key Simulator application is automatically upgraded on Autel Diagnostic Device according to the selected vehicle system function.
4. Place the Smart Key Simulator close to the ignition coil for data collection, which is used for decoding the chip.After decoding, the original car chip data can becopied.
5. The emulator key chip can generate various types ofkey chips with subsequent upgrades according to requirements.

AUTEL APB112 Smart Key Simulator Overviews:




1. Status Indicator - Indicates The Current Status
1) Lights Solid Blue - the power supply is working properly and in default state;
2) Falshes Green - the data interaction status;
3) Flashes Red - the status of upgrading;
4) Lights Solid Red - the boot status

2. USB Interface - Provides power and data communication
 
Package includes:
 
1pc x AUTEL APB112 Main Unit
1pc x USB Cable