Wifi GM MDI 2 Diagnostic Interface with V2022.2.0 GM MDI Software Pre-installed on Lenovo T410 Laptop I5 CPU 4GB Memory Ready to Use
- Work on all GM CHEVROLET BUICK CADILLAC GMC HUMMER PONTIAC SAAB Vauxhall/Opel 16 pin vehicles from 1996 to 2022.
- High-quality Vauxhall/Opel dealer diagnostic interface with Global TIS, GDS 2, Tech2Win software.
- Wifi GM MDI 2 V2022.2.0 GM MDI Software Pre-installed on Lenovo T410 Laptop Ready to Use
1. With V2022.2.0 GM MDI Software Pre-installed on Lenovo T410 Laptop I5 CPU 4GB Memory Ready to Use
2. Wifi GM MDI2 works on all GM CHEVROLET BUICK CADILLAC GMC HUMMER PONTIAC SAAB Vauxhall/Opel 16 pin vehicles from 1996 to 2022.
3. High-quality Vauxhall/Opel dealer diagnostic interface with Global TIS, GDS 2, Tech2Win software.
4. Support Protocols: UART, Class 2, KWP2000,GMLAN (CAN)
5. Support online programming function with GM SPS Subscription (Need to Buy Addtionally)
6. Complete list of live data streaming for all main ECU and New software flash for existing ECU to fix drivability issues
Notice: FD Can Protocol Not Support.
GM MDI 2 Multiple Diagnostic Interface with Wifi Card
This is a HQ GM MDI Multiple Diagnostic Interface
WIFI Version for all GM CHEVROLET BUICK CADILLAC GMC HUMMER PONTIAC SAAB Vauxhall/Opel 16 pin vehicles from 1996 to 2017.
GM MDI 2 is the Multi Diagnostics Interface works as the high-quality Vauxhall/Opel dealer diagnostic interface, used with Global TIS, GDS 2, Tech2Win software on a new laptop, for the full dealer level diagnostics and programming for Vauxhall/Opel 16 pin vehicles from 1996 to 2017.
GM MDI 2 Functions:
* Automatic vehicle recognition
* DTC reading and removal
* Complete list of live data streaming for all main ECU
* Recordable / playback of live data
* New software flash for existing ECU to fix drivability issues
* Programming and installation of new ECU (PCM, ABS, Instrument cluster, air bag, fuel pumps etc.,)
* Programming new keys
* Setting / removing speed limiters
* J2534 pass thru offering ECU re-flash and diagnostics for other vehicle manufacturers, when subscribed to their specified software
* More dealer specific functions
The J2534 Configuration Application
The Multiple Diagnostic Interface (MDI) is a J2534 device that connects between your computer and the vehicle’s J1962 DLC connector for pass-thru
programming of the vehicle’s ECU’s. The J2534 Configuration Application is installed onto your PC at the same time as the MDI Manager software allowing you to control how your TIS 2 Web application will connect to an MDI. In addition, this application provides API Monitoring controls to aid in investigating problems encountered while using any J2534 devices (including the MDI).
To launch the J2534 Configuration Application from SPS, press the “configuration” button on the Diagnostic settings screen.
Check Engine Compartment for components which may be loose; kinked or pinched vacuum hoses or electrical connections, and for any other missing or disconnected components.
Check to assure that hoses and electrical wires are properly routed to provide sufficient clearance with adjacent moving or hot parts.
Observe the movement or freedom of movement of linkage, valves and other components.
Check for unusual noises within the engine compartment.
Visually inspect for seepage and leaks at hoses and pipe connections, seals, gaskets and plugs.
Tighten clamps and connectors as necessary.
Check power steering gear, lines and hoses for leaks and clearance with adjacent panels, moving or hot parts. Tighten clamps and connectors as necessary.
Test engine coolant protection.
Check all fluid levels; engine oil, transmission oil, power steering oil, battery, brake, and cooling system.
Add inspection items as needed
Check throttle linkage for freedom at wide open and closed throttle.
Check tension on all belts.
Check operation of all interior and exterior lights;
Road test on a route with road conditions permitting the proper evaluation of squeaks and rattles.
During this test, check the following items for proper operation and function;
Visually inspect vehicle undercarriage for looseness, missing components and line routing and clipping, and fluid leaks. – Tighten clamps, couplings and connectors as necessary.
Data transfer and Electronic Control Unit (ECU) reprogramming
Shop network communications (LAN and WLAN)
Future expandability, including diagnostic applications
Second Hand Laptop Lenovo T410 I5 CPU:
Screen Size: 14.0
Memory (RAM): Intel(R)Core(TM)I5 CPU
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.
Primary Drive: DVD+/-RW Processor Speed: 2.53GHz
Processor Configuration: Dual Core
1pc x GM MDI2
1pc x DLC Cable SAE J1962
1pc x 10-ft. USB A to USB B Cable
1pc x 500GB GM MDI 2.5" SATA HDD
1 set x Lenovo T410 laptop
If you have any questions about the device, the price or the payment, please feel free to contact us.
Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 2-4 working days with No Tax. We have stock in our UK and EU warehouse for most items.
2) 4PX Express: 6 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 10-12 working days for European Countries. Our company have IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax, So usually no tax or extra fee for EU customers.
4) DHL Shipping: 3-5 working days. For the items have no stock in UK warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: firstname.lastname@example.org
If you cannot download software in the default CD, or if you need technical support for software install, please send email to email@example.com, we will help you by Teamviewer.