Launch X-431 PAD VII PAD 7 Automotive Diagnostic Tool Support Online Coding and Programming Support ADAS Calibration
X-431 PAD VII is an unexpected high-end diagnostic tool from LAUNCH, support the ADAS calibration function, 50+ service functions, TPMS service and 8 extended modules functions. New Smartlink C VCI powers technician a new diagnostic level without the limitation of diagnostic functions, tools and vehicle types.
Highlights of Launch X-431 PAD VII
1. Global Version Without IP Limitation, Free update online for 1 year.
2. Full system vehicle coverage for U.S., Asian and European markets over 110 brands, which is continually updated
3. Advance OE-level functions.
4. With 50 services functions:Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS and etc.
5. Support Online Programming Till Year 2020: BMW, Benz, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti and many coverage from Smartlink
6. Realtime Remote Diagnosis Function via WiFi
7. Multi-Language Supported: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Swedish, Chinese
8. Ship from UK&EU Warehouse, 2-3 Days Arrive with tax free!
Note: Online programming function is not supported in USA, Canada and Spain.
X431 Pad VII Functions Introduction
1. Advance OE-level function
√ Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.
√ Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
√Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc.
√Online Account Login Service: Compatible with Volkswagen / Audi / Skoda / Seat etc.
√Online Calibration: Compatible with Volkswagen / Audi / Skoda / Seat etc.
√Online Parameterization: Compatible with Volkswagen / Audi / Skoda / Seat etc.
√Anti-theft IMMO Serivce: Compatible with Volkswagen / Audi / Skoda / Seat etc.
√Power Balance: Compatible with Chrysler / GM / Ford etc.
√Programmable Module Installation: Compatible with Ford / Mazda etc.
2. Online Programing of Launch X431 PAD VII
X431 PAD VII supports programming and coding, which is to write the relevant control information of the software into the automotive computer's programmable EPROM or FLASH by making use of the electronic communication transmission technology.
X431 PAD VII Support intelligent recognition of programming files, convenient and quick operation.Support for Mercedes-Benz, for Benz New Energy, for BMW, for BMW New Energy, for GM, General New Energy, for Ford,Ford New Energy, for Volkswagen, for Volkswagen New Energy, for Audi, for Audi New Energy, for Land Rover, for Nissan,Skoda, for Seat, for Mazda and other models Programming function.
3. ECU CODING
ECU Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts. this functions works for 98% car models(including BMW, Volkswagen, Porsche, etc.)
4. The Bi-Directional Control (Active Test)
enables you to transmit control commands to operate the vehicle systems, without using the vehicle's controls, to verify system input and output such as:
Turn on the radiator fan / Turn on interior & exterior lights / Turn on sound horn / Modulate the throttle / Open & close windows / Operate mirrors / Test door lock actuators/ Injector Test ;Turn Off ACC Lane Keeping Assist System (LKAS) ;Turn ON/OFF Front and Rear side ACM Solenoid , turning the fuel pump on and off, cycling the a/c ,clutch on and off, Left clutch electromagnetic coil test，Acceleration Device Test，Oil Pressure Control Test，DYNAMIC camera aiming，Vehicle level position calibration, Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Botors, Wheel Speed Sensor Supply, PARKING BRAKE tests （Vary by car, Hundreds of actuation test functions …
5. Full Systems Diagnoses In All Vehicle Systems on the ECUs
Engines/ Auto Transmission/ Airbags/ Immobilizer/ Key Coding/ ABS/Cruise Control/ Instruments/ Self Leveling Suspension systems /Seats/ Doors/ Gateway/ Steering Angle/ Air Suspension/ Body Systems/ Electronic Power Steering & Motor Assisted/ Power Steering/ Tyre Pressure/ Rain Sensors/ 4WD System Stabilizer/Intelligent Parking Assist/ Door Motors/Audio Systems/Air Conditioning/ Anti Theft/ Soft Top/ Headlamp Leveling/Electric Windows/ Plip Programming/ Heated Rear Window/ Xenon Headlights/ Wash Wipe/ Fuel Burning Heater/ Transfer Box/ Seat Memory/ Oil Life Service Reset/ Sliding Doors/ Electronic Throttle / Navigation System/ Rollover Sensor/ Cruise Control/ Multi Function Steering Wheel/ Aux Heating/ Electron...tc /Seats/ Doors/ Gateway/ Steering Angle/ Air Suspension/ Body Systems/ Electronic Power Steering & Motor Assisted/ Power Steering/ Tyre Pressure/ Rain Sensors/Air Conditioning/ Tiptronic/ Anti Theft/ Soft Top/ Headlamp Leveling/ Central Locking/ Automatic Clutch/ DPF Reset / Electric Windows/ Plip Programming/Seat Memory/ Oil Life Service Reset/ Sliding Doors/ Electronic Throttle / Navigation System/ Rollover Sensor/ Cruise Control/ Multi Function Steering Wheel/ Aux Heating/ Electron..etc
6. Accurate ADAS Calibration functions (Need extra buy)
Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW),lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting.this aytomotive scanner can read the fault codes on ADAS system,but if want to do the ADAS calibrate function,you need to extra buy the ADAS rack.
7. TPMS Diagnostic Function (Need to extra buy TSGUN )
LAUNCH X431 PAD VII can work with wireless tire pressure diagnostic tool to achieve the features of TPMS activation, programming and learning.((NOTE: Need to be purchased separately)) a)Activation:to activate the sensor's lD, wheel pressure, sensor frequency, tire temperature and battery status. b)Programming:to program sensor data to a blank sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication. c) Learning:to write the sensor ID into the vehicle ECU for sensor identification
8. Key IMMO / Key Fob Programming
Key Fob Programming/IMMO is mainly used to disable the lost vehicle keys and program a new replacement key fob for special vehicles.
Note: the key programming function is NOT universally compatible .please check compatibility with us if necessary. LAUNCH X431 PAD V supports PINCode reading for most cars before 2008 ,for vehicles after 2008,you need to have PINCode to do key programming
√ Add A Key: Add On An Extra Key To The Vehicle
√ Reset Key: Relearn The Key
√ All Keys Lost: Both Key Missing,Create New Key To the Vehicle
9. 50+ Special functions
This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving
conditions and climate. This function can be performed in the following cases:
1. If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
2. After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.
If the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the
To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.
This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).
This function allows you to quickly look up the tire sensor IDs from the vehicle's ECU, as well as to perform TPMS replacement and sensor test.
The crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the computer to more accurately diagnose engine misfires. If tooth learning is not performed for a car equipped with Delphi engine, the MIL turns on
after the engine is started. The diagnostic device detects the DTC P1336 'tooth not learned'. In this case, you must use the diagnostic device to perform tooth learning for the car. After tooth learning is successful, the MIL turns off.
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to
stabilize the filter performance.
This function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.
If vehicle won't start or "Check Engine" light is illuminated. Check car's fuel system regularly ensures the best performance of your car with the lowest emissions.
This function is used to set the size parameters of the modified or replaced tire.
Use this function to activate the electronic water pump before venting the coolingsystem.
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, ureareset operation is required.
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) inengine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
10. Provides Module Network Structure Topology,Better to let you know the car clearly and simple !
Color-coded topology displays all system status in one page!!!View structure of communication between modules
With topological diagram Function,it can displays the entire system through the Topology Map to glance all the modules with faults, which is easy to locate faults and causes.
Up to 5 ways of DTC display: Topology, list, separately click into the control unit, Intelligent Diagnostics details, vehicle diagnosis report, among which Topology is the newest and innovative configuration.
Display the entire system through the Topology Map to glance all the modules with faults, which is easy to locate faults and causes. Color-coded topology displays all system status in one page and structure of communication between modules. Communication between modules and status can be spotted in a glance and you can locate faults more intuitively to solve problems quickly!
NOTE: Topology is not universal to all the vehicles, please check VIN for compatibility before you place order!
11. PIN Detection Function
Pin detection can be used to detect the voltage of the vehicle OBD-II diagnostic socket pins and the supported protocol types to help technicians judge the OBD-II diagnostic interface.if the detection result does't match the actual vehicle configuration,the corresponding pin may be faulty.
12. Support 8 Extension Modules
1. Videoscope (Mainly applied to check unseen parts of engine, fuel tank, braking system, etc.)
2. TSGUN (activate all sensors, tpms relearn, program only Launch Sensors)
3. X431 PRO3 (IMMO For VAG Group Above 3.5)
4. X431 Heavy Duty Module (diagnose gasoline vehicles & 24V Diesel Trucks)
5. X431 ADAS Moblie/ADAS PRO (calibrate a wide range of camera-based & radar-based driver assistance systems)
6. X431 Printer (Print out diagnostic data/ reports.)
7. BST360 Battery Tester
8. VSP-600 Inspection Camera Videoscope
Car Models Coverage:
1. Australian: AUST Holden, AUST Ford
2. Asian: Toyota Lexus, Honda/Acura, Mazda, Subaru, Nissan Infiniti, Mitsubishi, Hyundai, Isuzu, Daihatsu, KIA, Daewoo, Suzuki, Proton, Tata, Mahindra, Ssangyong, Perodua, Maruti
3. European: Audi, Mercedes Maybach, BMW MINI Rolls Royce, VW Bentley Bugatti, Opel Vauxhall, Peugeot, Citroen, Volvo, Sprinter, Renault Dacia, Fiat Romeo Abarth Lancia, Rover, Landrover, Saab, Seat, Skoda, Smart, Maserati, Ferrari, Arston Martin, Porsche, Jaguar
4. USA: USA Ford/Lincoln, GM, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Jeep
5. Chinese: Changcheng (Great Wall), Geely, Qirui_TY(Cherry), Futian, Changan, Changhe, Haifei ….etc.
Heavy Duty Vehicles (Optional):Software Coverage:
Launch X-431 PAD VII PAD 7 Specification
X-431 PAD VII
13.3' touch screen 1920*1080
3.5' touch screen 320*480
Rear 13MP, Front 8MP
Dual Band 2.4 & 5GHz
Dual Band 2.4 & 5GHz
WiFi & BT & USB
|Product||X431 Pad III|
|Display||10.1'' / IPS 1920*1200||10.1'' / IPS 1920*1200||13.3'' / 1920 x 1080 IPS|
|CPU||2.0GHz Octa-core||2.0GHz Octa-core||2.0GHz Octa-core|
|Memory||2 GB||4 GB||8 GB|
|Storage||64 GB||64 GB||256 GB|
|Camera||8MP Rear + 2MB Front||13MP Rear + 8MB Front||13MP Rear + 8MB Front|
|VCI Connector||DBScar IV||Smartbox 3.0||Smartlink C|
|VCI Connection||Bluetooth||2.4GHz & 5GHz dual WiFi||2.4GHz & 5GHz dual WiFi|
|Adjustable Supporting Holder||●||●||●|
|IP65 Waterproof & Dustproof||●||●|
|Quick Charge Technology||●||●|
|PUSH PUSH Design|
|Size (mm)||317 * 202 * 53||320 * 211 * 46||353 * 236 * 71|
|Operating System||Android™ 5.1.1||Android™ 7.1||Android™ 9.0|
|Full System Diagnosis||●||●||●|
|OBD II Full Function||●||●||●|
|Tech-to-Tech Remote Diangosis||●||●||●|
|Smartlink Remote Diagnosis||●|
|Auto VIN Identification||●||●||●|
|VW & AUDI Guided Function||●||●||●|
|Complete TPMS Service||with X-431 TSGUN||with X-431 TSGUN||with X-431 TSGUN|
|Advanced Key Programming||with X-PROG 3||with X-PROG 3||with X-PROG 3|
|Vehicle Coverage||Passenger Cars Medium & Light Duty Vehicles Heavy Duty Vehicles (Optional)||Passenger Cars Medium & Light Duty Vehicles Heavy Duty Vehicles (Optional)||Passenger Cars Medium & Light Duty Vehicles Heavy Duty Vehicles (Optional)|
|Service Functions||21||26||32 by local diagnosis
Get More by Smartlink Remote Diagnosis
|Elec. Throttle RLRN||●||●||●|
|Nox Sensor Reset||●||●||●|
|Seats Call Bration||●||●||●|
|AC System Relearn||●|
|Engine Power Balance Monitoring||●|
|Rotation Angle Sensor Calibration||●|
|High-Voltage Battery Health Detection||●|
|More Reset Services||Via Smartlink Remote Diagnosis|
|X-431 ADAS PRO||●||●||●|
|X-431 ADAS Mobile||●||●||●|
|X-PROG 3 Immobilizer||●||●||●|
|BST360 Battery Tester||●||●||●|
|X-431 TSGUN TPMS device||●||●||●|
|X-431 O2-1 Osciloscope||●||●||●|
|X-431 S2-2 Sensorbox||●||●||●|
|HD III Module||●|
|Remote Diagnosis: Diagnose vehicles without being on-site with Launch scan tools
Smartlink Remote Diagnosis: Diagnose vehicles without being on-site with Launch scan tools, OEM tools or other diagnostic tools of different brands.
If you have any questions about the device, the price or the payment, please feel free to contact us.
Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 2-4 working days with No Tax. We have stock in our UK and EU warehouse for most items. Items titled "UK Ship" are shipped from UK warehouse to UK Customers. Items titled "EU Ship" are shipped from EU Warehouse to EU Customers.
2) 4PX Express: 6 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 10-12 working days for European Countries. Our company have IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax, So usually no tax no extra fee for EU customers.
4) DHL Shipping: 3-5 working days. For the items have no stock in UK warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: firstname.lastname@example.org
If you cannot download software in the default CD, or if you need technical support for software install, please send email to email@example.com, we will help you by Teamviewer.