Autel MaxiPRO MP808TS offers maximum convenience and swift diagnosis. Together with the ability to quickly read and clear Original Equipment Manufacturers (OEM) enhanced codes for TPMS module of the majority of the makes and models on the market, MP808TS provides you with superior special functions for TPMS services with ease.
Autel MaxiPRO MP808TS Diagnostic Tool with Complete TPMS Service and Diagnostic Functions
AUTEL MaxiPRO MP808TS is your perfect companion. Featuring a fast quad-core processor, MP808TS offers maximum convenience and swift diagnosis. The intuitive user interface makes using the device effortless through a 7-inch LCD touch-screen that displays at 1024 x 600 quality. With the ability to quickly read and clear Original Equipment Manufacturers (OEM) enhanced codes for TPMS module of the majority of the makes and models on the market, MP808TS provides you with superior special functions for TPMS services with ease.
Top Reasons To Get Autel MaxiPRO MP808TS:
1.Top Professional TPMS Scanner:
Autel Maxipro MP808TS is a perfect combination of Autel MS906 and TS601/608 and with same TPMS function as MS906TS. It is specially designed to fix all the TPMS issues, best used for complete TPMS health check, sensor activation, relearn , program, TPMS sensor retrofitting. Please be informed a professional online after-sales service team is always on call 24/7 so as to conquer the problems you meet.
2.OE-level All Systems Diagnostics + ECU Coding:
OBD2 Scan Tool MP808TS is capable to read/clear codes, view live data, ECU info and perform active test, adaptation, matching, coding for all vehicle systems (Engine, Body, Powertrain, Chassis) to help your repair tasks, including ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System, etc. MP808TS is a real cost-effective diagnostic scanner to perform powerful module scan and ECU coding.
3.Active Test (Bi-directional Control):
Auto diagnostic scanner MP808TS gives you what snap-on scanner offers. It features Bi-Directional Control (Active Test) to request information or command a actuator to perform specific tests, such as turning the fuel pump on and off, cycling the a/c clutch on and off, performing an evaporative emissions leak test, fast troubleshooting your car, not simply by reading codes, reading live data.
4.30+ Maintenance Functions:
A well-bred horse deserves a good saddle. A real comprehensive OBD diagnostic scanner requires all-in-one functions. Autel Scanner MP808TS diagnostic tool has been upgraded with over 31 service functions, such as Oil Reset, EPB, BMS, SRS, ABS Bleed, SAS Calibration, DPF Generation, Injector Coding, Throttle Matching, Suspension Matching, TPMS, etc. Moreover, Maxipro MP808TS can be constantly upgraded with more functions to meet your various maintenance needs.
5. Wide Coverage:
The automotive scanner is compatible with 80 US, Asian and European vehicle makes and models.
6. Supported Multi-language:
English, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Italian, Japanese, Russian. (Please provide your SN to activate the language you need)
7. Free Update Online for 1 Year. USD450/Year after that.
8. 12 Months Warranty.
9. Ship from UK&EU Warehouse, 3-5 days arrive!
MaxiPRO MP808TS Functions in Detail
1. Full Systems Diagnosis In All Vehicle Systems
Autel MP808TS can access to ALL vehicle systems and subsystems, such as Body, Chassis, Powertrain, Network and etc., to perform a comprehensive scanning on ECUs to locate fault systems and retrieve DTCs.
1). To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
2). To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
3). To diagnose Fuel system if vehicle won't start or "Check Engine" light is illuminated. Check car's fuel system regularly ensures the best performance of your car with the lowest emissions;
4). To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
5). To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
6). To diagnose Light System if you see rapid signal blinking or dimming lights. And more...
2. Advanced TPMS Diagnostics with Code Description
1). At-A-Glance TPMS Status screen—One-Step Complete TPMS health check
2). Activate 98% of all known TPMS sensors Program AUTEL MX-Sensor
3). Comprehensive OBDII relearn coverage
4). Displays vehicle-specific Relearn procedure for all manufacturers
5). Perform OBDII TPMS Sensor Relearn
3. Special Functions
1). Oil Reset Service to reset service mileage and service intervals for the Engine Oil Life system;
2). TPMS Service to look up the tire sensor IDs from ECU, as well as to perform TPMS programming and reset procedures after sensor replacements;
3). EPB Service to deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement, etc.;
4). ABS/ SRS Services to perform bi-directional tests to check the operating conditions of ABS and SRS, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc.;
5). SAS Service to perform calibration for the Steering Angle Sensor, and clear fault memory;
6). DPF Regeneration Service to clear the blockage through the continuous burning of the particulate matter captured in the DPF filter
7). BMS Service performs a reset on the vehicle battery for clearing the fault information and re-match the battery;
8). Brake Bleed performs various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS), and turn off the warning light;
9). IMMO Service clear the lost car key's information and program the new key into the ECU database to protect user's car from being stolen;
10). Injector Coding writes the new code to the ECU after replacement of injector, so that the injector works;
11). Throttle Adaptation initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately;
12). Tire Pressure Monitor System Reset (TPMS Programming Service): Quickly looks up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.
and much more......
4. Full OBD2 Functions
1. Read Permanent Trouble Codes
2. Read Live Data Stream when the engine is running to make sure it works fine
3. Query Freeze Frame Data which is saved when troubles happen and helps you find the problem
4. Read Current Trouble Codes
5. Clear Trouble Codes and turn off the check engine light (MIL)
6. O2 Sensor Monitor Test will measure the oxygen content of the exhaust to ensure compliance to a state emissions standard
7. On-board Monitored System Test can retrieve and display test results for emission-related power train components and systems that are not continuously monitored
8. Read Pending Trouble Codes indicate problems that has been detected but not considered serious yet. They won't turn on the MIL and can be erased if faults don't occur
9. Component Monitored System Test
10. Read Vehicle Identification Number which may be abraded on the engine. You can easily get the vehicles'info when you need.
You can use MP808TS to check the emission condition before you drive out. In this way, you can easily pass the test and can't be fined.
5. Active Test
During the actuation test, MP808TS outputs command to the ECU in order to drive the actuators, and then determines the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators, such as switching an injector between two operating states. (This option is used to access vehicle-specific subsystem and component tests. Available test varies by the vehicle manufacturer, year, and model.)
6. ECU Coding
Note: The Flash Hidden Function and Guided Function can only be performance on certain vehicle models, please let us know for further detail before purchasing.
Part 1 ECU Coding
ECU coding is one of the criteria by which a professional mechanic is judged, but it also adds value to your business. The ECU coding allows vehicles to stop being bound by OE settings.
Tuning the ignition time, tuning the oil injection, adjusting the air intake, tuning the auto gearbox shift point, etc. These functions the others can only dream of! It’s like opening a pandora box that you don’t want to be closed! If you happen to be in the car tuning industry, the ECU coding can be a great plus and give you an edge over peers!
Part 2 Flash Hidden Function
The Flash Hidden function allows you to customize some of the features on the vehicles such as one-touch signal flickers, deactivate some buzzing sounds, needle sweep (Only for VW), auto-hold, etc.
Part 3 Guided Function
And also, the Autel MaxiPRO MP808TS provides you with the guided function especially for VW and Audi. The guided function will guide you step-by-step through the complexities of the situation. So you would have a clear picture of what to do!
7. Other Supportive Features
1). Shop Manager feature keeps all data files, customer information, and vehicle records and history well organized on tablet
2). Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes
3). Automatic system and software updates with real-time Wi-Fi push notifications
4). Remote control technology enables support to quickly repair or update tool
5). One-stop multitasking is designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized.
MaxiPRO MP808TS Vehicle Coverage - More Than 80 Makes
Acura, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, Subaru, Suzuki, Toyota...
Abarth, Alfa, Audi, Bentley, Benz, BMW, Bugatti, Citroen, Dacia, EU Ford, Fiat, Jaguar, Lancia, Land Rover, Maybach, Mini, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW...
Chrysler, Ford, GM...
AU Ford, Holden...
MaxiPRO MP808TS Specifications:
||Android™ 4.4.2, KitKat
||Cortex-A9 quad-core processor (1.4 GHz)
||7-inch LCD capacitive touchscreen with 1024x600 resolution
||Mini USB 2.0 USB 2.0
HDMI Type A
Micro SD card slot (supports up to 32GB)
||Light sensor for brightness auto adjust
|Power and Battery
||3.7 V/5000 mAh lithium-polymer battery
Charges via 5 VDC power supply
|Tested Battery Life
||Around 7 hours of continuous use
|Battery Charging Input
||5 V/1.5 A
||600 mA (LCD on with default brightness, Wi-Fi on) @3.7 V
||0 to 55°C(32 to 131°F)
||-20 to 60°C (-4 to 140°F)
||5% - 95% non-condensing
||ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW,SAE-J1850PWM,
ISo11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,
GM UART UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
1pc x USB Cable (for charging)
1pc x USB Cable (for test)
1pc x MP808TS
1pc x USB External Power Adapter
1pc x User Manual
1pc x Quick Reference Guide
1pc x Carry case
If you have any questions about the device, the price or the payment, please feel free to contact us.
Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 3-5 working days with No Tax. We have stock in our UK and EU warehouse for most items. Items titled "UK Ship" are shipped from UK warehouse to UK Customers. Items titled "EU Ship" are shipped from EU Warehouse to EU Customers.
2) 4PX Express: 6-8 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 10-12 working days for European Countries. Our company have IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax, So usually no tax no extra fee for EU customers.
4) DHL Shipping: 5-8 working days. For the items have no stock in UK warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: firstname.lastname@example.org
If you cannot download software in the default CD, or if you need technical support for software install, please send email to email@example.com, we will help you by Teamviewer.