Autel MaxiSys Elite II Pro Automotive Diagnostic Tool with MaxiFlash VCI Support SCAN VIN and Pre&Post Scan
The MaxiSys Elite II Pro is an advanced diagnostic tablet with a 9.7-inch touchscreen and an Octa-core processor, running on the Android 10 operating system. It comes with 128GB of storage memory and a Bluetooth-enabled MaxiFlash VCI/J2534 pass-thru programming device, allowing for comprehensive vehicle diagnostics and analysis, as well as advanced ECU programming. With its powerful performance, the MaxiSys Elite II Pro can rapidly handle any job thrown at it.
Autel Elite II Pro Highlights:
1.
Advanced ECU Programming/ Coding: Update version of Maxisys Elite, MaxiSys Elite II Pro; same ECU Programming as Autel Ultra/ Ultra lite/ MS909/ MS919
2.
No IP Blocking: You can use Autel Elite II Pro all over the world.
3.
2-Years Free Software Updates: After you register and log in, you can enjoy a free software upgrade for two years. After update expired, you can pay for
Autel Elite II Pro Update Subscription
4. Support
CAN FD & DOIP, D-PDU/J2534/RP1210 protocols
5. Upgrade
Auto Scan 2.0: Auto VIN & Scan VIN & Scan License, 5x faster than competitors, save scanning time and troubleshoot fault quickly
6.
Pre & Post-scan: Pre-and Post-Scan reports keep your clients informed of the repair details and provide them with the evidence to settle insurance claims
7.
Bi-directional Control: Also called Action Test, Transmit control commands to operate the vehicle systems to do functional test.
8.
Multi-Language: English/French/Spanish/Portuguese/German/Polish/Italian/ Dutch/Russian/Japanese/Korean
9.
38+ Maintenance: Solve car maintenance and annual check concerns
10.
Battery Test(Work with BT506): With bt506, you can perform full battery detect: battery register, battery reset, In/out vehicle test, etc.
11.
FCA Auto Auth to connect FCA (FCA after 2018) server and get authorized to diagnose your vehicles: for Chrysler, JEEP, Dodge, Fiat etc.(
this needs to be activated extra).

Autel MaxiSys Elite II Pro Features:
- The most extensive complete system coverage for more than 80 US, domestic, Asian and European makes and models
- Exceptional OE-Level functionality from comprehensive OBDII diagnostics & services to advanced ECU coding and programming
- Uniquely integrated vehicle programming capabilities working with a SAE J2534-1 & -2 compliant vehicle programming pass-thru interface
- Technical Service Bulletin search listing
- Guided procedures with Repair Assist and Recommended Solutions
- Automatic system and software updates with real-time push message notifications via internet
- Instant remote control tech support anytime, anywhere
- Interactive Data Logging sessions enable direct contact with Autel Support for first-hand troubleshooting of diagnostic bugs and errors
- One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
- Unique ergonomic design with rubberized outer protection and a rugged internal housing
Autel MaxiSys Elite II Pro Top Advanced Diagnosis
Advanced Diagnostics is a specific fault code analysis function, with which you can access the most comprehensive and the latest code-specific data, DTC analysis, repair assistance, repair tips, and relevant repair cases.
Advanced Diagnostics adopts scientific data cloud computing technology to match the specific fault code with the exact vehicle model. And the data has been thoroughly verified by automotive maintenance professionals.
The following are main parts of the code data contained in Diagnostics:
1. Vehicle System and Detected DTC(s): This section displays the scanned vehicle systems that contain faults
2. Technical Service Bulletin (OEM Information): Contains DTC-related recalls, TSB, and OEM campaigns.
3. DTC Analysis: Provides repair assistance information related to the fault code,including the fault description, condition, fault influence, possible cause, and possible solution.
4. Repair Assist: Intelligently prioritizes DTCs and leads the user to the proper repair
5. Repair Tips: displays a range of diagnostic and repair steps, including the information needed in order to clear the faults. The repair steps are provided in text and video.
6. Component Measurement: Provides a general troubleshooting overview and detailed information and instructional guides on using the oscilloscope to test components for faults.
7. Relevant Cases: Offer recommended repair cases that may be relevant to the current vehicle and/or the current fault. These repair cases may provide greater insight into diagnosing and repairing your vehicle.
Advanced ECU Programming/Coding
ECU Programming for BMW/Mercedes Benz --ECU programming with maxisys elite ii pro scanners is powerful for automotive professionals, allowing them to diagnose, repair, and enhance vehicle performance. It provides the ability to optimize engine parameters, update software, and even retrofit vehicles with different configurations. It can read the existing data and programming information stored in the ECU, write new software or firmware into the ECU,provide the capability to rewrite the software within the ECU.
ECU Coding --Elite ii Pro allows users to perform a variety of tasks related to Engine Control Unit (ECU) coding. ECU coding refers to the process of reprogramming the control module to enable or disable certain features or functions in a vehicle. Enhanced control over their vehicles, allowing them to customize features, improve performance, and adapt the vehicle to their specific needs. This functions refers to Accessing Manufacturer-Specific Codes/Enabling/Disabling Vehicle Options/Performance Tuning/Coding Retrofits
Note: ECU coding only works for brands Benz/BMW/Audi/Porsche/VW,for details ,please email car VIN to check.

OE-Level All System Diagnosis
Elite II Pro can Read and Erase Codes on all available vehicle systems,Exceptional OE-Level system coverage for all electronic systems,View Freeze Data and view and graph Live Data, Compatible with European ,U.S. vehicles, 1996 and newer.
Read Codes: This function retrieves and displays the DTCs from the vehicle’s control system. The Read Codes screen varies for each vehicle being tested. On some vehicles, freeze frame data can also be retrieved for viewing.
Erase Codes: After reading the retrieved codes from the vehicle and certain repairs have been carried out, you can decide to erase the codes from the vehicle using this function.
Live Data: This function displays the real time PID data from ECU. Displayed data includes analog inputs and outputs, digital inputs and outputs, and system status information broadcast on the vehicle data stream.
38+ Advanced Hot Reset Functions
Autel MaxiSys Elite II Pro automotive diagnostics scanner collects over 38+ maintenance for one-click sweep obstacles: Oil Reset, EPB, SAS, A/F Setting, Throttle, Suspension, Headlamp, Injector Coding, Power Balance, etc. MaxiSys Elite II All System Diagnosis scan teeny fault codes in a few minutes among all available electrical systems.
Oil Reset - Reset the oil change calculator in the engine and automatic transmission
EPB - Replacement of brake pads on vehicles with an electric parking brake
SAS - Adaptation of the sensor to the angular position of the steering wheel
DPF - Regeneration of diesel particulate filter
Brake Bleed - ABS Brake Bleeding
TPMS - Battery registration and reset
Seat Calibration - Calibrate the memory in replaced or repaired seats
Airbag Reset - Resets the airbag data to clear the airbag collision fault indicator
A/F Reset - Set or learn Air/Fuel ratio parameters
Suspension Reset - Adjust the vehicle body height sensor for level calibration
BMS - Battery registration and reset
More......
Autel MaxiSys Elite II Advanced Functions
Autel Elite II Bi-directional Control (Active Test)--Elite II automotive diagnostic scanner comes with bi-directional control capability to perform active tests to determine the integrity of a system or parts like ABS, window, door, roof, by reading the ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay.
Note: Available tests vary depending on the manufacturer, year, and model, and only the available tests display in the menu. To check compatibility with your vehicle, please refer to Autel website or consult us directly.
Autel MaxiSys Elite II Pro Vehicle Coverage:
- For Asian: Acura, Daihatsu, Hyundai, Infinity, Kia, Mazda, Nissan, Scion, Subaru, Toyota, Mahindra, Proton, Dawoo, Honda, Hyundai CV, Isuzu, Lexus, Mitsubishi, Samsung, SsangYong, Suzuki, Fuso, Perodua, Tata
- For Europe: VW, Abarth, Aston Martin, MINI, Sprinster, SKODA, Citroen, Fiat, Lancia, Maserati, Opel, Porsche, SAAB, Vauxhall, Seat, Bugatti, Audi, BMW, Alfa, Benz, Maybach, Ferrari, Jaguar, Land Rover, Peugeot, Renault, Smart, Volvo, Lamborghini, Bentley, Rolls-Royce, VW CV, Dacia, LT3
- For USA: Chrysler, Dodge, Ford, GM, JEEP

Add-On Functions
MaxiSys Elite II Pro is a diagnostic scanner with various interfaces that can access to more Add-on like Inspection Camera, HDMI Projector, Phone, PC, USB Memory Stock, Headset, Oscilloscope, Extend SD Card etc.
1. Elite II Pro connects to a MV108S inspection camera and turns into a video inspection scope, allowing you to examine difficult-to-reach areas normally hidden from sight.
2. Work with Autel BT506 for battery test.
3. Maxisys Elite II works with Autel MP408 oscilloscope providing you an insight to the inner workings of a vehicle's electronic circuits.
Comparison Between MaxiSys Elite II Pro and MaxiSys Elite II
Model |
MaxiSys Elite II Pro |
MaxiSys Elite II |
color |
gray |
gray |
processor |
Octa-core Processor |
Octa-core Processor |
operating system |
Android 10.0 |
Android 7.0 |
RAM |
4GB |
4GB |
ROM |
128 GB |
128 GB |
screen |
9.7 inches |
9.7 inches |
resolution |
1536*2048 |
1536*2048 |
Wi-Fi |
Wi-Fi (802.11 a/b/g/n/ac) |
Wi-Fi (802.11 a/b/g/n/ac) |
BT |
BT V5.0 + BR/EDR |
BT V5.0 + BR/EDR |
USB |
USB 2.0:(2 USB HOST Type A, 1 USB mini device) |
USB 2.0:(2 USB HOST Type A, 1 USB mini device) |
HDMI |
Yes |
Yes |
SD Card |
Yes |
No |
Battery |
3.7V 11000 mAh |
3.7V 15400mAh |
Camera |
Rear: 16 Megapixel, AF with Flashlight |
Rear:16 Megapixel,Autofocus with Flashlight
Front:5 Megapixel |
VCI |
MaxiFlash VCI |
Flash Elite |
DoIP |
Yes |
Yes(requires adapter) |
CANFD |
Yes |
Yes(requires adapter) |
The Difference of Elite II Pro and Elite II
Elite II Pro Hardware:
Android Version: Android 10
Processor: Octa-core Processor:4x 2.2 GHz(A73) + 4x 1.8 GHz(A53)
BT: BT V5.0 + BR/EDR
VCI: MaxiFlash VCI
CAN FD/DoIP: no need converter
Elite II Hardware:
Android Version: Android 7
Processor: Octa-core Processor:2.3GHz Quad-core Mongoose + 1.7GHz Quad-core A53
BT: BT v.2.1 + EDR
VCI: Maxiflash Elite
CAN FD/DoIP: need converter
Product Specifications:
Operating System |
Android 10.0 |
Processor |
Octa-core Processor:
4x 2.2 GHz(A73)
4x 1.8 GHz(A53) |
Memory |
4GB RAM & 128GB On-board Memory |
Display |
9.7 inch LED capacitive touch screen with 1536*2048 resolution |
Connectivity |
Wi-Fi (802.11 a/b/g/n/ac) |
BT V5.0 + BR/EDR |
GPS |
USB 2.0: (2 USB HOST Type A, 1 USB mini device) |
HDMI 2.0 |
SD Card |
Camera (rear) |
Rear: 16 Megapixel, AF with Flashlight |
Power and Battery |
11000 mAh 3.7 V lithium-polymer battery |
Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C |
Input Voltage |
12V (9-24 V) |
Operating Temp |
0 to 50°C (32 to 122°F) |
Storage Temp |
-10 to 60 (14 to 140 °F) |
Package Includes:
1pc x main unit
1pc x auxiliary power outlet adapter
1pc x quick reference guide
1pc x MaxiFlash VCI
2pcs x spare fuses(6x30mm)
1pc x packing list
1pc x main cable V2.0
1pc x clipper cable
1pc x carrying case
1pc x USB cable V2
1pc x AC/DC power adapter(12V)
1pc x mini USB cable
1pc x soft cloth
▲
----------------------------------------------------------------------------------------------------------------------------------------
If you have any questions about the device, the price or the payment, please feel free to contact us.

E-Mail:Sales@carTool.co.uk
Whatsapp: 86-18186426016
Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 2-4 working days with No Tax. We have stock in our UK and EU warehouse for most items.
2) 4PX Express: 6 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 10-12 working days for European Countries. Our company have IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax, So usually no tax or extra fee for EU customers.
4) DHL Shipping: 3-5 working days. For the items have no stock in UK warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: sales@cartool.co.uk
Technical Support
If you cannot download software in the default CD, or if you need technical support for software install, please send email to sales@cartool.co.uk, we will help you by Teamviewer.
