Autohex II BMW Full Package
- Autohex II Diagnostic Scan Tool has been designed to be you own technical assistant, especially in BMW cars where things were stuck before Autohex II be in market.
- Now, Ecu programming and coding, Ecu replacment (including DME/DDE, CAS, FEM, BDC, EGS,...etc), Key Programming, Manual coding, and many other advanced functions became so easy and safe with our new software interface and online services.
BMW Technicians who are looking for a tool that can do everything possible in BMW cars
Autohex II BMW Scan tool is the best choice among BMW diagnostic tools, All in one Scan tool for BMW Ecu Programming and Coding, ISN Software Read and Write, and BMW Key Programming
1. AUTOHEX II BMW series do not accept return for refund, just accept one year warrantry for repair, please know this.
2. Update fees for Autohex II BMW Full is 750USD/year.
3. For ECU Cloning functions of Hextag, just 90 Days free to use, if you need to continue to use, need to pay 1000USD, then 350USD update each year.
If you do not need this function, no fee is needed.
Autohex II BMW functions:
Autohex II BMW Functions Introduction
- Read old ISN in BMW E series for following Ecus:D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE, N62_TUE2.
- Read Long ISN (SK) in BMW E series from following Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0
- Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
- Read/Write long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
- MDG1 Read ISN in BMW F series from following Ecus: DME_83T1, DME_841, DME_841H, DME_861, DME_88T0, DDE803.
- MDG1 Read ISN in BMW G series from following Ecus: DME_840, DME_840H, DME_84T0, DME_860, DME_86T0, DME_88T0, DDE803P, DDE832C.
- ISN Reading from Tricore Ecus by boot mode.
- Indivedual Programming for any Ecu in BMW E and F series
- Ecu Swapping if hardware is matched.
- CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
- Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
- BMW E series EGS ISN matching with CAS
- BMW F series EGS 6HP and 8HP EWS Resetting
- BMW E Series, F Series and G Series coding for all Ecus (calculation of Ecucoding is calculated from FA)
- BMW advanced coding (manual coding)
- Vehicle order modification and backup and restore from LM,FRM,...ETC
- Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
- Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
- Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
- Read/Write ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the Ecu.
- Ecu Cloning/Tuning for a wide range of brands. This function is free for 90 days (Check Supported Ecu List).
- Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
- Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool
- Modify KOMBI Mileage by HexTag tool
- Renew all BMW keys, and many other brands by HexTag tool.
Programming BMW Ecu individually
BMW Ecu Programming is an easy to use with Autohex II, it performs Flashing the Ecu with latest version,code it,Change VIN, and other functions in one step
Autohex BMW Diagnostic Tool supports Programming any Ecu individually (DME, DDE, DSC, CAS, FEM, Airbag, KOMBI, Radio,..etc), no matter if you brought the Ecu from a junk yard or a brand new!
Furthermore, this diagnostic tool matches the VIN with the vehicle as well as the Ecu Flash to a proper flash to make it compatible with the vehicle (Swapping Ecu)
BMW ISN Reader and Writer Software
BMW Ecu programming is a straight forward procedure with Autohex II scan tool, you can simply select any Ecu to program, Autohex II will do the following in one step:
Program the Ecu the latest flash version, this update is calculated based on the FA (Vehicle Order)
Code the Ecu to match the configurations of the vehicle, this is also calculated based on Vehicle Order.
Change the VIN if it is not matching the car VIN.
Perform some important service functions.
BMW Ecu Programming usning Autohex II:You must be connected to the internet before start using BMW Ecu programming procedure, as Autohex II software will need to download the required data flash from Microtronik server database.It is important to arrange a good battery booster connected to the car, voltage must remain above 13V during all the programming session, and the laptop must be connected to a charger if the Ecu programming period will take a long time.
After you select Individual Programming from the Autohex II BMW menu, AutoHex II software will start calculating the Ecus flash updates. This may take:
Few seconds if the car is E series
Few minutes if the car is F/G series and it is first time to be tested.
Few seconds if the car is F/G series and being tested before.
The results of the Ecus updates will appear eventually on a list describing each Ecu:
BMW Hardware Part Number
BMW Software Part Number
The Status of this Ecu
The required Action of this Ecu
The status of the Ecu is very important indication, you may find one of the following possibilities:
Update Available: This Ecu is compatible with the stored vehicle order in the car, there is an update for this Ecu.
Updated: This Ecu is compatible with the stored vehicle order, no update is required as it has the latest version, you can only codes it.
Replace with XXXXXXX: This Ecu is NOT COMPATIBLE, and must be replaced (or swapped by expert mode)
Mount XXXXXXX: The Ecu could not be found, it may not responding or it is not mounted (usually you will see BMW Hardware and BMW Software zeros)
Autohex II allows you to jump to next step only ifEcu is compatible
, OR markedReplace Withif you are in Expert Mode (BMW E series only).
The next step will show Ecu details such current VIN,
current Part number, Target part number, and Estimated Required Time for programming.
Once you click on Start
, Autohex II will check the conditions like: Car battery voltage, connection method (USB or Wi-Fi), laptop battery status, then it will download required flashing data from server. If all conditions are pass, then will start preparing vehcile for programming, and starts the programming session afterward.
BMW ISN Editor Software in Autohex II lets you read ISN from DME, match it with CAS. This is essential for DME or CAS replacement, Autohex reads ISN from wide range of DME/DDE
Autohex BMW Diagnostic Tool is considered as the most powerful tool for managing ISN (Individual Serial Number) in CAS, DME and EGS.
Full support to read and write ISN to all CAS versions (1,2,3 and 3+) including latest updates.
Supports almost all ISN reading of DME/DDE in E series up to latest produced models.
Supports almost all ISN read and write DME Ecus from BOSCH in F series.
Autohex II BMW Scan Tool is the only software can change the DME ISN (read/write)
Integrated function to do the entire job for matching EGS ISN in E and F series
You can read more about BMW ISN Editer
Coding BMW Ecu individually
Autohex II Ecu coding for BMW is a straight forward function, you can choose between Auto and Manual coding to encode the Ecu you wish
ou can select any Ecu to code it from the coding list, Autohex II BMW Software offers you two methods:
Automatically: It will encode the Ecu the default configurations that supposed to be in the Ecu (calculated from vehicle order).
Manually, You can manipulate the Ecu configurations by manually selecting the options you wish to enable or disable features in this Ecu.
If you want to learn more about Autohex II BMW Ecu Coding features, check BMW Ecu Coding
BMW Vehicle Order Editor
Autohex II BMW Software can write FA into CAS from other Ecus,backup FA in other Ecus, also you can modify the vehicle order safely
You can do everything you imagine in this function like:
Recover original FA (Vehicle Order) from the backup Ecu (LM or FRM depends on series): This is very useful option when you want to create a new CAS for a car has no CAS at all.
Backup the current FA from the CAS: This option is useful when you replace the LM or FRM Ecu
Save FA data in your laptop: This will help you to secure all your job
Changing FA elements safely for Retrofit: Autohex II will do the validation of your changes before you can write them into the CAS
More info about Vehicle Order Editor
BMW EGS ISN Synchronization
Autohex II supports EGS EWS Reset for 6HP in E series and EGS EWS Reset for 8HP in F and G series, only few steps are required
For making keys, reading ISN and changing VIN for CAS which comes with specified part numbers, will not work just through direct reading, CAS Firmware function should be done to make it work
BMW Key Programming E Series And Mini
BMW Key programming by Autohex II is done by OBD, No dump is required. including CAS with latest update and all keys lost. it supports all BMW Models as well Mini cooper.
Autohex II BMW Diagnostic Tool with the help of HTag Pro key programmer is the best solution for those who are looking for a single diagnostic tool that solves all cases in BMW key programming in both E and F series.
Using the equipped functions of key programming, you can read, write, block, unblock, save and delete any key in the CAS.
Autohex II BMW Scan Tool has an advanced functions for Encrypted CAS (CAS3+, CAS4+), you can add new key with or without working keys available for all versions of CAS3+, CAS4 and CAS4+.
if you want to learn more, check BMW Key Programming
FEM and BDC Unlocking
Autohex II is the only tool that can unlock FEM/BDC without soldering, and it is the only tool that regenerates a secret file, and the only tool that can restore FEM back
Autohex II with HW4 is the most safe tool that can unlock BMW BDC and FEM modules. No need to desolder and solder the BDC/FEM module when you are working with Autohex II, the job is done in one click.
After you get BDC/FEM Secret Info File, you can:
Make a new key even if all keys lost
Change VIN, Ferquency
Read DME ISN info from BDC/FEM
CAS And DME On Bench
DME and CAS Wiring diagram For Autohex IIAutohex BMW Diagnostic Software provides two different channels of CAN BUS acting like a Gateway, this Gateway simulation will allow you to connect both DME (or DDE) and CAS together to Autohex II WVCI and then you can do all required jobs like key programming, ISN matching, Ecu programming and coding simultaneously on both Ecus in one session.
ISTA Rheingold Is Supported
Autohex II Scan Tool WVCI can run ISTA/DAutohex II Hardware (WVCI) is compatible with BMW Dealer Scan Tools like ISTA/D Rheingold, INPA, and other programs.You can have all your BMW programs installed on one laptop and using different programs without changing the OBD connector.
Autohex II Hardware WVCI HW 4
The powerful HexTag BDM and Key programmer
BMW Software Standard License
ISN Boot Mode License
BMW Ecu Programming License
BMW Key Programming License
BMW ISTA/D driver to run dealer software
1 year technical support
1 year hardware warranty
1 year online access to online programming
Autel IM508 No IP Block Version! UK&EU Ship!
Lonsdor K518 Series Newest Update
If you have any questions about the device, the price or the payment, please feel free to contact us.
Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 3-5 working days with No Tax. We have stock in our UK and EU warehouse for most items. Items titled "UK Ship" are shipped from UK warehouse to UK Customers. Items titled "EU Ship" are shipped from EU Warehouse to EU Customers.
2) 4PX Express: 6-8 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 8-10 working days. No Tax for European Countries.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
(Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you need faster DHL shipment,
please contact us ,thank you)
4) DHL Shipping: 5-8 working days. For the items have no stock in UK warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: firstname.lastname@example.org
If you cannot download software in the default CD, or if you need technical support for software install, please send email to email@example.com, we will help you by Teamviewer.