BMW E/F Scanner suits for BMW cars of series E60, E65, E66, E70, E71, E81, E82, E87, E88, E90, E91, E92, E93, F01, F02, F07, F10, Mini Cooper R56 and Rolls-Royce BMW Explorer.
BMW E/F Scanner Supported model list:
• 1-series (E81, E82, E87, E88), 2003+
• 3-series (E90, E91, E92, E93), 2004+
• 5-series (E60), 2002-2010
• 5-series (F10), 2010+
• 5-series “Gran Turismo” (F07), 2009+
• 7-series (E65, E66), 2000-2008
• 7-series (F01, F02), 2007+
• BMW X5 (E70), 2006+
• BMW X6 (E71), 2007+
• Mini Cooper (R56, R57), 2005+
• Rolls-Royce, 2003+
BMW E/F Scanner List of supported ECU:
• Drive – 6 categories / 30 types; CAS, DME, EGS, EKPM, GWS, VTG
• Chassis – 12 categories / 15 types; ASR, CIM, DSC, EDC, EDCSHL, EDCSHR, EDCSVL, EDCSVR, EHC, EMF, RDC, VDM
• Body – 65 categories / 121 types; AHM, AMP, BFH, BFS, BZM, CCC, CDC, CHAMP, CIC, CID, DWA, ECL, FAH, FAS, FLA, FOMO, FRM, FZD, HKL, HUD, IHKA, JBBF, KBM, KGM, KOMBI, LMA, MASK, MMC, MMI, MPM, PDC, PGS, RAD, RFK, RLS, RSE, SASL, SASR, SBSL, SBSR, SD, SECUR, SFZ, SGM, SHD, SHZH, SIM, SSBF,SSFA, SSH, STVL, STVR, SZL, SZM, TEBF, TEFA, TEL, TMB, TMBH, TMF, TMFH, VID, WIM, ZBE, ZGM
BMW E/F Scanner System capabilities:
DTC reading with clear text explanation, car setting adjustment, maintenance interval adjustment, key programming or blocking, remote control synchronization and much much more!
1.166 types of ECU supported
2.Diagnosis and interpretation of error codes
3.Reading and adjustment of run hours and maintenance intervals for: Oil, Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as СО, СН inspections etc.
4.Adjustment of mileage and maintenance intervals
5.Change/Adjust FA code (currently in test mode)
7.Read/Write RAM/FLASH/EEPROM *
8.Read/Write ISN (marriage CAS and DME/DDE) * Note: the function is under the updating by the dealer, any news we will inform online.
9.ELV Reset (steering wheel lock)
10.Key read/write via OBD2 in CAS2, CAS3, CAS3+
11.Key prog module for E/F-series
12.Learning key or transponder directly in the ignition lock!
13.Lost keys blocking/unblocking
14.Mileage correction module for E/F-series
15.Change AIF (indexes of programming)*
16.Reading the last saved mileage from ECU VIN change *
17.New battery registration
NOTE: Instrument cluster and CAS1CAS2 CAS3 must be adjusted MANUALLY
software system which allows to read,decode and edit ISN password (It is sync password betweenECU and immobilizer ) Correct checksum also calculated automatically
BMW E/F Scanner Tech tip:
Procedure of used ECU installation in car with automatic transmission:
Install used DME/DDE
Switch ignition ON.
Connect BMW explorer,and run Quick test.
Go to EGS ,press Unlock EWS
Got to DME/DDE and read ISN
Switch ignition OFF,connect to CAS,write down old ISN,write ISN previously read from DME/DDE and save it.
Switch ignition ON
Go to DME/DDE and make synchronization procedure.
There is a dongle for BMW E/F Scanner in the package. Each dongle has the serial number, only can be used the same hardware in the package. So please do not lost the dongle in the package.
Please disable/uninstall anti-virus software before download this software!
Please note,anti-virus software can flag up this product software as having a virus. This is a false positive and is due to the software containing the application file like .exe.
BMW Explorer Prog Software Display
So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable virus scanner! Our product software is completely safe and virus free and all other virus scanners confirm this.
(Please check it on our technical service webpage)
BMW E/F Scanner FAQ:
Q: Can bmw ef scanner work with 2010 f10 isn coding in gearbox and ecu reading ?
A: The bmw ef scanner can work with bmw ecu version 4.6 and below.
Bmw ef scanner can not read isn code in the gearbox of bmw f10 2010 as the factory report this function is not available now.
Q: Do you have the user manual for how to use this software?
A: This software is very easy to use. Insert the CD and connect the dongle with on your computer, then you can directly open the software. After you open the software, you will see the menu. Then you can choose the function in the menu.
Q: Can you send the software to me? I want to test the software first before i buy it.
A: We can send the software to you. But as you do not have the dongle, so you cannot open the software. We have attached the video on our website, you can see the video.
Q: I was wondering if the BMW explorer is completely unlocked?
A: All the function on this software is activated ready, you can directly to use it. No need to pay extra fee to open the software authorization.
Q: Does BMW E/E Scanner support update or not?
A: It can only update via email, please do not update it online, or use other software on our device, otherwise it will be blocked, you have to send it back to us for repair
Q: Can BMW Explorer Prog work with ISTA 46 cas3+ 2013?
A: Yes, it can.
Q: Can BMW E/F Scanner work with BMW f-series? Can add key to CAS4?
A: Yes, it can.
Q: Do I need connect the device to computer for key programming?
A: Yes, you need
Autel IM508 No IP Block Version! UK&EU Ship!
If you have any questions about the device, the price or the payment, please feel free to contact us.
Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 3-5 working days with No Tax. We have stock in our UK and EU warehouse for most items. Items titled "UK Ship" are shipped from UK warehouse to UK Customers. Items titled "EU Ship" are shipped from EU Warehouse to EU Customers.
2) 4PX Express: 6-8 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 8-10 working days. No Tax for European Countries.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
(Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you need faster DHL shipment,
please contact us ,thank you)
4) DHL Shipping: 5-8 working days. For the items have no stock in UK warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: firstname.lastname@example.org
If you cannot download software in the default CD, or if you need technical support for software install, please send email to email@example.com, we will help you by Teamviewer.