All- System Scanner
The diagnostic scan tool LAUNCH CRP909E will give your car a full detection since it can read/clear DTCs and view live data, and service functions for ALL Systems,For instance: Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics, ....etc.( OVER 100,0000 CAR OWNERS & MECHANICS 's First Choice)
15 Reset Service Functions
Oil Lamp Reset Service: Allows you to perform reset for a new calculation of Engine Oil Life system once changed
EPB Electronic Park Brake Reset: It is important in the maintenance of electronic braking system's safety and efficiency.
BAT battery service: Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
DPF Diesel Particulate Filter Reset: Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
SAS Steering Angel Sensor Reset： Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
TPMS Tire Pressure Monitoring System Reset： Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
IMMO Reset：The unique car key programming
ABS Bleeding：ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system
Sunroof Reset：The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
Suspension Reset：Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.
Gearbox (Transmission )Reset：Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
Injector Coding：Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
AFS Headlamp Reset：'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
Gear Learning：The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
Throttle Adaptation：The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:
This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
One-Click identify VIN
One-Click identify VIN
Unlike other scan tool, you have to manually input the VIN ,with Launch CRP909E Scan tool, the Fast VIN AutoDetect function saves a lot of time instead of manually entering it for every vehicle.allowing you to quickly figure out the tested car according to the vehicle identification number. This function is effective when you want to know if the manufacturer had ever issued a recall of the vehicle and whether the repairs were made, or you prefer to retrieve the history report of a used car to know its previous owners, accidents or repairs.
4 Live Data Stream Analyse in 1 Graph
View Live Data Graphing of Engine/Airbag/ABS Systems, 4 Live Data Stream Analyse in 1 Graph: This OBDII automotive scanner shows live vehicle sensors data in text,multiple graph format. shows 4 live Readiness and allows you to focus on any suspicious or symptom-specific data parameters.
Live Data Stream Graphing：provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor1 , Actual Output Shaft Speed , Clutch A Actuator Motor , Vehicle Battery and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it.
Live Data Stream Record：allow you to record the live data stream and view the data of a certain point in a targeted manner. So that you can view the data more clearly.
Live Data Stream Playback：After you have recorded the data for a period of time, if you want to view and analyze the data just recorded, you need to use data stream playback function to help you. You can view the data at any time you recorded. Then you can choose " Combine", " Report" and " Record".
Live Data Stream Sharing：will let you share any data status and content you want to display anytime, anywhere. You can send it to your friend or mechanic to help you solve complex problems.
will scan all vehicle modules and give you a status list for each modules condition. Also known as “Global Test” or “Full Scan” . You no longer have to worry about potential problems in your car.
Health Report Sharing
will provide you the choice to share your health report after diagnosis via WIFI or E-mail. Very convenient and fast, you can share it to your friends or mechanics to analyze the report for you or ask them some questions about it.
Battery Test & Monitoring
Battery Test & Monitoring
Faulty charging system will lead the car can not work, launch crp909e obd2 scanner add Real-Time Battery Monitoring, allowing you monitor vehicle battery automatically with reliable real-time graph data , determine the battery's health status， help you know the possible battery and the charging system problems in head of time.
LAUNCH X431 CRP909E Supported Carlist
LAUNCH X431 CRP909E Technical Parameters
Perating System:Android 7.1
Processor:Powerful Quad-Core Processor
Display:7 inch IPS touch screen
Connectivity:Mini USB 2.0, Wi-Fi
Battery:6000mAh lithium-polymer battery
Battery Life:more than 8 hours
Product Net Weight: 700g
LAUNCH X431 CRP909E Package List
1 * CRP909 Android Tablet
1 * OBD-II Diagnostic Cable
1 * DC Power Charging Cable
1 * User Manual 1 * Nylon bag
If you have any questions about the device, the price or the payment, please feel free to contact us.
Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 2-4 working days with No Tax. We have stock in our UK and EU warehouse for most items.
2) 4PX Express: 6 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 10-12 working days for European Countries. Our company have IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax, So usually no tax or extra fee for EU customers.
4) DHL Shipping: 3-5 working days. For the items have no stock in UK warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: firstname.lastname@example.org
If you cannot download software in the default CD, or if you need technical support for software install, please send email to email@example.com, we will help you by Teamviewer.