Super MB Pro M6+ with SSD and Second-hand Panasonic FZ-G1 I5 Tablet 8G Full configuration

Product Description

Super MB Pro M6+ with SSD and Second-hand Panasonic FZ-G1 I5 Tablet 8G

What's included?

• Super MB Pro M6+
• SSD 256GB 
• Second-hand Panasonic FZ-G1 I5 Tablet 8G without Hard Disk

Product Introduction:
 
Based on M6, Super MB PRO M6+ has greatly improved product functions and compatibility, and is 100% compatible with the original Mercedes-Benz software.
 
Product Features:
 
1.100% compatible with the original Mercedes-Benz software.
 
2.The front label of the M6+ uses a design with trademark rights and art copyrights to improve product recognition.
 
3.The communication interface between the M6+ and the computer is a USB3.0 interface, which improves the compatibility of the product with computers and tablets. (Compatible with both old and new computers and tablets, no need to choose old-fashioned computers and tablets with network ports.)
 
4.M6+ supports remote C-side operation. The client does not need to install special diagnostic testing software. Just connect the M6+ to a local computer that can access the Internet, and we can remotely provide customers with paid diagnosis and detection services of vehicle failure. Customers can also set up a local remote diagnostic test in the local area network. The above ways greatly improve the product flexibility.
 
5.M6+ supports BMW E-SYS, Aicoder, wired and wireless programming and coding of F and G series, and supports BMW modification, hidden functions activation.
 
6.M6+ supports BMW APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing) and other mobile phone software, supports MHD .Bimmergeeks .. XHP Flashtool. ODIS-e.XDelete.THOR-the M Flasher.PRO- Tool and other mobile apps.
 
7. M6+ supports vehicles with DOIP communication protocol, such as the new Volkswagen, Audi, Skoda, Bentley, Lambo, etc. A dedicated transition button is provided.

8. Support new models such as W223 c206 213 167.
 
Product Functions:
 
M6+ and M6 product function comparison chart
 

	M6 Product Functions	M6+ Product Functions
XENTRY	√	√
XENTRY Truck	√	√
DTS	√	√
VIDEO	√	√
MB DOIP	√	√
MB WIFI	√	√
PC USB	×	√
PC RJ45	√	×
BWM Aicoder	×	√
BWM E-SYS	×	√
BWM APP	×	√
Other DOIP	×	√

 
M6+ Connection Instructions


 
1. Connection between MB diagnostic software and hardware
 
(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, ② is always on and beeps once, indicating the startup is finished.
(2)Wired connection: Connect the USB port ⑦ of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and the IP address of the network connection property will be changed to 169.254.255.*, Subnet mask: 255.255.0.0, Preferred DNS: 169.254.255.255, click “Advanced”, add multiple IP addresses as 172.29.127.*, 255.255.0.0. After the computer or tablet is connected to the network, ④ the indicator light will be on.


(3) Wireless connection: You cannot find the wireless network by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet, just connect it. ⑤ The green light of the wireless indicator is always on, the wired light is off, no setting is required, the password is 123456789.
(4) After opening the BEN software lock on the computer side, the original diagnostic test software can be used normally.
(5) For remote C-end operation, please consult us.
 
2, Connection between BWM software and hardware  
 
(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, it is always on and beeps once, indicating the startup is finished.
(2)Wired connection: Connect the USB port of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and change the network connection attribute IP address to 172.29.127.* 255.255.255.0. Click “Advanced” and add a multi-IP address as 169.254.0.* 255.255.255.0. After the computer or tablet is connected to the network, the indicator light ④ will be always on. Press and hold the switch button ⑥ on the side for 3 seconds and then release it. You can see that the ④ green indicator light is always on and then flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.
(3)The wireless network can NOT be found by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet. You can connect without any settings, and the password is 123456789, ⑤The wireless indicator green light is always on, ④The wired indicator is off. Press and hold the ⑥ switch button on the side for 3 seconds and release it, you can see ⑤the wireless green indicator light is always on and turns to flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.
(4) The computer-side BWM software adopts wired or wireless connection, and the mobile phone BWM APP software adopts wireless connection.
(5) For remote C-end operation, please consult us.

3. For DOIP function and hardware connection of other diagnostic test software, please refer to BWM software and hardware connection method.

Product Comparison Chart
 

SKU	Accessories
SP436	1pc x SUPER MB PRO M6+ Host 1pc x OBD2 16pin Cable 1pc x USB Cable 1pc x 38PIN Cable 1pc x 14PIN Cable 1pc x 4PIN Cable
SP436-B	1pc x SUPER MB PRO M6+ Host 1pc x OBD2 16pin Cable 1pc x USB cable
SP436-C	1pc x SUPER MB PRO M6+ Host 1pc x OBD2 16pin Cable 1pc x USB cable 1pc x 14PIN Cable

Package Includes:

1pc x SUPER MB PRO M6+ Host
1pc x OBD2 16pin Cable 
1pc x USB Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable
 

Item	Super MB Pro M6	Super MB Pro M6+
Xentry Car	Yes	Yes
Xentry Truck	Yes	Yes
DTS Monaco	Yes	Yes
Vediamo	Yes	Yes
MB DoIP	Yes	Yes
MB WiFi	Yes	Yes
PC USB	Yes	Yes
PC RJ45	Yes	No
BMW Aicoder	No	Yes
BMW E-sys	No	Yes
BMW App	No	Yes
Other DoIP	No	Yes

2023.09 MB Star Xentry SSD 256G

Software includes:
Xentry/ DAS：2023.09
WIS：2021.07
EPC： 2018.11
PL76： 2022.01
SDmedia Offline： 2014.01
Starfinder 2022
Vediamo：5.01.01
DTS  Monaco：  8.16.015 &9.02 (9.02 needs to pay)
Selit Service Literature：1.4
SWFinder：5.2

Support Languages: English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian; Spanish, Swedish, Turkish, Chinese.

Second-hand Panasonic FZ-G1 I5 3rd generation Tablet 8G without Hard Disk

Basic Information:
 
Name: Desktop-1KA03JR
Operating system: Windows 10 Enterprise LTSC 64-bit(10.0, Build 19044)
Language: English
System Model:FZ-G1AAHJFLM
Processor: Intel(R)Core(TM)i5-3437U CPU @ 1.90GHZ(4 CPUs), ~2.4GHZ
Memory: 8192MB RAM
Note: The tablet uses a SSD with mSATA interface.

Package Includes:

1pc x Second-hand Panasonic FZ-G1 I5 3rd generation Tablet 8G without Hard Disk
1pc x Charger
 

----------------------------------------------------------------------------------------------------------------------------------------
If you have any questions about the device, the price or the payment, please feel free to contact us.

E-Mail:Sales@carTool.co.uk
Whatsapp: 86-18186426016

Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 2-4 working days with No Tax. We have stock in our UK and EU warehouse for most items. 
2) 4PX Express: 6 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 10-12 working days for European Countries. Our company have IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax, So usually no tax or extra fee for EU customers.
4) DHL Shipping: 3-5 working days. For the items have no stock in UK warehouse, we will ship it by DHL.  We will declare a lower price on the invoice to help your clearance. 

If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: sales@cartool.co.uk

Technical Support
If you cannot download software in the default CD, or if you need technical support for software install, please send email to sales@cartool.co.uk, we will help you by Teamviewer.