UK/EU Ship Lifetime Free Update Auto 4% off Xhorse Multi-Prog ECU & TCU Programmer Clone Tool with GODIAG GT100 OBDII Breakout Box and GODIAG ECU GPT Boot AD ECU Connector

Product Description

Xhorse Multi-Prog ECU & TCU Programmer Clone Tool

Xhorse MULTI-PROG Pro-level programmer is a reading and writing device for automotive chips, electronic modules, especially ECU modules. It integrates the programming, reading, writing and cloning functions of common automotive MCUs, automotive memory chips, common electronic modules and automotive ECU boards.

VVDI Multi PROG Pro-level programmer supports batch writing of chips, and batch writing of chips is often used in factories when production requires large-scale writing of chips. The types of writes supported are common memory series and common microcontroller series. For the specific usage of batch writing, please refer to the documentation of the factory usage mode that comes with the software.

Batch programming function: Multi-PROG devices support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be realized. The main difference between Xhorse VVDI PROG programmer and Xhorse MULTI-PROG Pro-level  programmer is that  MULTI-PROG Pro-level  programmer has the batch programming function but VVDI PROG programmer does not.


Xhorse Multi-Prog Highlights:

1. Built-in update software: Make Multi-Prog firmware update timely.

• Software: V1.1.5.0(Xhorse Multi-prog Software Download)
• Firmware:  V1.2.1
• Database version: V23
• Free Update online frequently(detail information, please check Xhorse Multi Prog Update Log)
• Language: English, Chinese

2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: Lists potential error causes for informed troubleshooting.
4. Future-Proof Design: Reserve ports available for future updates.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed
7. Get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
8. With free MQB48 license. Bind Multi-prog to VVDI2 full version or key tool plus to the same Xhorse app account to use MQB48 NEC35XX function.
9. NEW! Add VAG MQB RH850 dashboard processor(need seperate RH850 cable for multiprog)
10. Supports Expert mode: batch write chips. vvdi prog only write a single chip at a time
11. Supports EDC17/MED17 data calculation (checksum correction) and IMMO OFF functions

VVDI Multi Prog Features:

• Support R&W lots of chips, include MC9S08 series, MC68HC(9)12series, MC9S12series, V850series, H8Xseries, R8Cseries, PCF79XXseries and most eeprom chips etc .
• Support chip data verify, checkblank function
• Support data file compare function
• Free Pin code calculation service by Dump for various models
• Support Read and Write BMW N20, N55 ECU (show ISN directly)
• Stable Read and Write MC9S12XE series chips (5M48H/ 1N35H/ 2M53J/ 3M25J etc.)
• Support renew PCF79XX remote, currently support BMW E/F series (Please Note PCF79XX adapter is optional)
• Has the largest database of connection diagram
• Supports Repair Porsche 12V lithium battery and BYD Lithium Battery (MC9S12XET256)

VVDI Multi Prog Functions:

Read, Write and Clone ECU

• BMW B48/B58 reading ISN
• BMW MSD80/81/85/87/MSV90
• Mercedes-Benz SIM271
• BMW MSV80
• VW BOSCH MED17 Series ECU
• BMW N13/N20/N55/B38/TC17X
• Support Marelli, Siemens, Delphi and other ECU manufacturers
• Compatible with Xhorse solder-free adapters and cables

Read, Write and Clone TCU

• Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
• Porsche DL501 TCU
• Ford Dodge and other MPS6 series TCU
• BMW DKC, Mercedes-Benz VCS and other models TCU
• Vehicle Engine Data Calculation and Processing

MED17/EDC17 data processing

• Support Flexible Extension of Third-party Plug-ins
• Support the development of third-party plug-ins and provide data processing and modification services.

Read & Write MCU

• Support reading and writing MCU of various brands including Renesas, Motolora, NXP, Infineon, etc.
• Support certain encrypted chip reading and writing.

Read & Write Vehicle Immo Module

• Support Porsche, LandRover, Mercedes-Benz EZS, Volvo, VW, MQB dashboard, Audi BCM2, etc.
• Support modules including BMW EWS, CAS1 CAS2CAS3CAS4+. FEM BDC, etc.
• Support other common immo modules.

Note: Compatible with Xhorse solder-free adapters and cables.
 
Read & Write EEPROM

• Support EEPROM and FLASH

Read & Write Vehicle Dashboard

• Support dashboard of WW, Honda, Hyundai, Kia, etc.

More Details for Xhorse Multi-Prog >>>>>>

GODIAG GT100 OBDII Breakout Box OBD2 Protocol Detector 16PIN OBD2 ECU Connectors for Vehicle ECU Maintenance/Diagnosis/Programming/Coding

GODIAG GT100 is a brand new ECU connector and protocol communication testing tool. It will greatly help a user to connect the ECU module separately for diagnosis, programming and coding. Also it will tell whether the diagnostic & programming tool can normally send out communication signal.
 

Top Reasons to choose GODIAG GT100 OBDII Break out box ECU Connector

1.GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance, diagnosis, programming & coding.
2. It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion.
3.Able to connect the single modules or multiple modules of the vehicle.
4.Connect with any diagnostic tool to tell whether the car communication is good or not.
5.Supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, key remote control fails or the fault light turns on.
6.One Year Warranty.
7.Can work with most device to do test, will make your operation much easier, such as xhorse vvdi2, Autel Scanner, Launch Scanner, Vident Scanner, and so on.

GODIAG GT100 Function:

-ECU connection
-OBDII Protocol Detector
-The cable can be extended
-Optional dedicated adater
-Comprtible with lost of devices
-Convert OBD1 diagnositc interface to the standard OBD2 diagnostic interface
- Save ECU data when replacing vehicle battery.

GODIAG ECU GPT Boot AD ECU Connector for ECU Reading Writing No Need Disassembly Compatible J2534/ Openport/ PCMFlash/ foxFlash/CG FC200

GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GPT Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.
 
GODIAG ECU GPT Boot AD Features:

1. ECU dedicated connection terminal.
2. Support manual ignition power control
3. The ECU interface cable is labeled
4. Support ECU conversion to OBD2 mode to read and write data
5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.
6. Support PCMFlash automatic control of ignition power supply
7. Support ECU opening BOOT method to read and write data
8. CANbus is equipped with a switch to freely select the 120Ω resistor
9. Support GPT to read and write data without disassembling the ECU.
10. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]
 
GODIAG ECU GPT Boot AD Functions:

• Diagnostic function supports standard OBD2 protocol equipment.
• Supports ECU reading and writing data, and supports J2534 devices.
• Only Scanmatik 2 PRO for PCMflash allows to form GPT1, GPT2 signals necessary to work with Module 71.
• Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,
• Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.

----------------------------------------------------------------------------------------------------------------------------------------
If you have any questions about the device, the price or the payment, please feel free to contact us.

E-Mail:Sales@carTool.co.uk
Whatsapp: 86-18086619023

Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 2-4 working days with No Tax. We have stock in our UK and EU warehouse for most items. 
2) 4PX Express: 6 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 10-12 working days for European Countries. Our company have IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax, So usually no tax or extra fee for EU customers.
4) DHL Shipping: 3-5 working days. For the items have no stock in UK warehouse, we will ship it by DHL.  We will declare a lower price on the invoice to help your clearance. 

If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: sales@cartool.co.uk

Technical Support
If you cannot download software in the default CD, or if you need technical support for software install, please send email to sales@cartool.co.uk, we will help you by Teamviewer.