Yanhua Mini ACDP BMW CAS1-CAS4+/FEM/BDC+ISN Read for BMW Key Programming& Mileage Correction
Yanhua Mini ACDP Programming Master with Module1/2/3 BMW Standard Package introduction
1. Basic Module (SK247)
- Yanhua Mini ACDP Mini BMW Tool full package supporting eeprom reading, CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+/FEM/BDC key programming/odometer reset and ISN code reading without soldering
- 1.Equals SK247 + SK247-1 + SK247-2 + SK247-3
- 2.Support CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+FEM/BDC Key Programming, mileage reset, program recovery
- 3.BMW DME ISN Code Read & Write
- 4.No Need Soldering.
Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP),
and parts of Freescale / NEC MCU in circuit programming (ICP). This module is a necessary basic configuration for other modules.
2. CAS Module (SK247-1 Module1)
(1) Support CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.
(2) Support CAS4/CAS4+ IMMO key programming in circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.
3. FEM/BDC Module (SK247-2 Module2)
Support FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.
4. ISN Module (SK247-3 Module3)
Read/write N20/N55/N13 ISN code via OBD.
Read/write MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.
Yanhua Mini ACDP Programming Master with Module1/2/3 BMW Standard Package List
Yanhua Mini ACDP Master Basic Configuration Package List:
1pc x ACDP Programmer Master
1pc x OBP+ICP adapter
1pc x Puncture socket
1pc x P8P ribbon cable
1pc x 8P cable
1pc x 20P cable
1pc x 12V power adapter
3pcs x paint surface cleaning needles (1.0mm,0.8mm,0.5mm)
1pc x BAV Key Adapter
Adaper List (Module1 SK247-1)
1pc x BDM01 adapter
1pc x BMW-CAS3 interface board
1pc x BMW-CAS4 interface board
1pc x BMW CAS2/3/4 interface
1pc x CAS3 firmware package
1pc x CAS4 firmware package
Adapter List (Module2 SK247-2)
1pc x FEM bridge
1pc x BDC bridge
1pc x Desktop OBD transfer board
1pc x BMW FEM/BDC test platform
1pc x Single-pin double-head cable
1pc x FEM bridge firmware package
1pc x BDC bridge firmware package
Adapter List (Module3 SK247-3)
1pc x BMW-N13 port board
1pc x N20 caliper for opening the hole of shell
1pc x N13 firmware package of interface board
FAQ on Yanhua Mini ACDP
Q:Hello i have your tool bmw acdp and i need authorisation bmw egs isn clear A51A how much for it?
A: If you have acdp master already, you just need buy module 11 now
Q: Can this device reset (to zero )bmw used key without opening ?
A: No, it do not support this
Q: I have a bmw e70 x5 year 2007, it is CAS3, what i need buy to do dash via obd port?
A: You need buy ACDP Master and module 1
Q: I have 2013 bmw f30 and all key lost, what module you recommend to buy?
A: You need buy Yanhua ACDP master and module 2 and module 3 adapters
Q: Whether it support for BMW 6HP，8HP TCU virgin; whether it can read and write isn from cas to egs?
A: It support 8HP only currently, 6HP model will be available in coming update.
Q: I want to change vin on my all modules in bmw f30 2015. correct odometer and write delete key, what shall i buy?
A: You need buy Yanhua ACDP Master and module 2 adapters.
Mini ACDP BMW Standard Package Reivew:
Reading ISN from MSD85 works fine without opening ecu, but write isn you need tricore pass and opening ecu. But with no tool that reads password this function is useless, hope they add a function to get password over ACDP.
When I can’t write isn to dme I will try to renew cas and write isn from dme in cas, hope that will work biggrin i will Test these days and Report
Nice to see someone with the tool!!
Read ISN OBD on F10 N55 engine. Perfect. Read ISN on MEVD172 open ECU perfect.
I'll try another key, all keys lost with ISN.
CAS3 board is easy to install
CAS4 board is a bit tricky both working good with mileage reset
Adding key on CAS3/3+ with working key works good, but you have to add on 4th place, when i try to use place 1-3 the app returns to place selection... (tested with some china keys)
FEM/BDC Mileage reset is also working good, for eep reading use a clamp instead of puncture socket, that cames with the device.
RF Test is working good, tested some key (VW, audi, porsche) but tested without app only with RF test adapter
Autel IM508 No IP Block Version! UK&EU Ship!
If you have any questions about the device, the price or the payment, please feel free to contact us.
Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 3-5 working days with No Tax. We have stock in our UK and EU warehouse for most items. Items titled "UK Ship" are shipped from UK warehouse to UK Customers. Items titled "EU Ship" are shipped from EU Warehouse to EU Customers.
2) 4PX Express: 6-8 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 8-10 working days. No Tax for European Countries.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
(Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you need faster DHL shipment,
please contact us ,thank you)
4) DHL Shipping: 5-8 working days. For the items have no stock in UK warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: firstname.lastname@example.org
If you cannot download software in the default CD, or if you need technical support for software install, please send email to email@example.com, we will help you by Teamviewer.