2 Years Free Update Launch X431 PAD VII Pad 7 Diagnostic Tool plus LAUNCH X431 EV Diagnostic Upgrade Kit + Activation Card

Product Description

Launch X431 PAD VII Pad 7 Full System Diagnostic and Programming Tool 



The ultimate LAUNCH X431 PAD VII is an unexpected high-end diagnostic tool from LAUNCH, comes with the ADAS calibration function, 50+ service functions, TPMS service, and 8 extended modules functions. New Smartlink C VCI powers technicians a new diagnostic level without the limitation of diagnostic functions, tools, and vehicle types. 



Highlights

Free update online for 2 years, $569 per/year later

Topology Mapping 

8 Extended Modules

With 50 service functions

Optional ADAS Calibration Functions (Need to pay)

Clone Mercedes Benz ECU 2015 upwards with X431 XPROG III.

Online Programming: BMW, Benz; Offline Programming: VW, Audi, Seat, Skoda, Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar, Land rover, Porsche

Supported Language: English, Chinese and other language depending on the car makes

Supports gasoline cars and diesel heavy-duty trucks (need to purchase truck software separately)

Now online programming function is available in the North American region.

Support D-PDU/J2534/RP1210 diagnostic standard, CAN/CAN FD/DOIP protocol.

Larger memory (8GB), smoother operation; strong light readable screen; support for three defenses

FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; *Need AutoAuth subscriptions (How to unlock SGW).

Supports Australian Ford and Holden, Brazilian, Indian and Malaysian cars 

Newly Added Functions:

 

• NEW! Adds EV diagnostic kit for new new Energy Battery vehicles 


• NEW! Adds "X-431 FIX" function (Need to purchase from Mall)


• Online ECU Programming: Easily reprogram ECU modules on 30+ vehicle brands.


• 3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.


• Topology Mapping: Visually show you all system relationships and DTC in color topology.


• OBD PIN Detection: Detect the vehicle protocols and OBDII pin voltage status to help technicians judge the OBD2 interface.


• Diagnostic Plan: Provides a plan to guide you on how to repair based on the currently detected fault codes.


• User Information: A large amount of diagnostic data is well stored in this module, including Reports, Order, Live Data Stream, etc.




 
•  
•  

Note: 

Supports BMW, VW, Audi, Benz online coding till 2021. Adds Nissan Renault offline programming in June 2022. 

Online Programming function has not been authorized in Portugal and Spain (Autel Ultra is recommended).

Register device within App rather than on x431 website, check the registration video.

According to function, Launch tool sequence: X431 PAD7> PAD5 >PAD3 >PRO5 >X431 V+> PROS V>PROS MIN

X431 PAD VII user manual is in device APP



Features

 

1. Full system vehicle coverage for U.S., Asian and European markets over 110 brands, which is continually updated

 

2. Upgrade and expand the X-431 PAD VII with more software and service via the new module 'MALL' as demanded

 

3. Real-time voltage display helps technician to monitor the voltage condition of vehicle during the diagnosis

 

4. Topology mapping gives a visual checking on DTCs and all systems communication status

 

5. Support automotive communication protocols CAN/CANFD/DoIP and automotive communication standards J2534/D-PDU/RP1210

 

6. Auto-detects the communications protocol of the vehicle and assist to check automotive OBDII port pin damaged or not

 

7. Intelligent diagnostic enable identify VIN automatically and access system quickly

 

8. Guided function for VW and AUDI

 

9. Optional ADAS calibration function increases more revenue

 

10. Advanced coding and programming function (Check: How to activate coding function in PAD VII)

 

11. An extended solutio to support TPMS service

 

12. 2.4GHz & 5GHz dual band communication ensures quick and stable connection

 

13. Empower technician to diagnose light, medium & heavy duty vehicles with Smarlink C

 

14. The basic functions include read & clear DTC, remote diagnosis, Bi-directional control, live data graph, wireless software update etc.

 

15. Build-in repair information and training video modules help to track and fix issue fast



16. Support some car makes coverage till 2023, incl. BMW, Benz, VW, Audi, GM, Ford, Chrysler, Toyota, Nissan, Honda, Land rover etc



17. Multi-language: English, German, Italian, French, Spanish, Portuguese, Chinese, Korean, Turkish, Swedish, Japanese, Polish, Czech, Russian, Dutch, Thai, Finnish, Danish, Romanian, Arabic, Persian, Hebrew, Croatian

 

Super Hardware Configuration

 

• [5G WiFi Communication] automatically connects within 20 meters, far better than traditional BT connection in transmission rate, diagnostic distance, and anti-interference.


• [Universal Physical Interfaces] include USB Type C, USB Type A, Micro-SD, Micro-SIM slot (LTE version), etc.


• [Patented Dual Diagnostic Modes] work on both local diagnostics & remote diagnostics.


• Core Processor + Android 9.0 OS] enhance the diagnostic speed of the multi-task process.


• [8+256GB Memory] ensures the smooth multi-task operation and keeps all the customer information, diagnostic data & files, and repair recordings.


• [13.3’ Touchscreen with 1920*1080] gives you a smoother view experience.


• [IP65 + Corner Protectors] more waterproof and more resistant to falls.




 
•  
•  

 

ECU Programming of LAUNCH PADⅦ VS. Other -Covering More Programming

 

• Online Programming: Mercedes Benz and BMW. Downloading the newer data from the online server and reprogramming it to the ECUs.Updating data and upgrading ECU software version.


• J2534 Programming: Working together with SmartLink VCI (J2534 pass-thru device) to perform J2534 programming.


• Offline Programming: Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar, Land rover, Porsche Program adaptive data for certain ECU modules after repair.




 
•  
•  

 

Why is the LAUNCH X431 PAD VII scan tool more powerful than another diagnostic tool?

 

• Saving More Time: The LAUNCH PAD Ⅶ scan tool could quickly and accurately identify problems stored in the car’s onboard memory, greatly lessening time in the garage.


• Spending Less Cost: With the Smartlink C device, LAUNCH X431 PAD Ⅶ can download OEM software to address problems such as the engine, ignition, fuel injection performance, and rpm levels, effectively preventing a small problem from developing into a more serious and more costly fault.


• Serve More Vehicles: Compatible with 30+ worldwide vehicle brands.


• Online programming tool X431PAD VII does not require an expensive online account, just connect to WIFI, saving maintenance costs.


• The smart box adopts dual WIFI communication to improve programming speed, thereby reducing the possibility of programming errors


• When using the J2534 tool, in addition to the connector, it is also necessary to consider issues such as adapting the computer, installation costs, and complete functions, which are not cost-effective.




 
•  
•  

 

Special Functions:



Service Lamp Reset

Electronic Throttle

Brake Reset

Immobilizer Reset

Battery Reset

Injector Coding

SAS Reset

TPMS Reset

ABS Bleeding

Gear Learning

DPF Regeneration

Gearbox Reset

Headlamp Reset

Sunroof Initialization

SUS Reset

EGR Adaption

A/F Reset

AdBlue Reset

Nox Sensor Reset

Stop/Start settings

Transport Mode

Coolant Bleed

Windows Calibrations

Seat Calibrations

Tyre Reset

Language Change



Add 6 New Special Functions:

Cluth matching

Turbocharging matching

FRM matching

Gateway module date calibration

ECU reset

Rainfall light sensor

 

Accurate ADAS Calibration functions

 

Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW),lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting. (NOTE: Need to be purchased separately)



Check the DTCs and all systems communication status visually by topology module mapping function.



Bonus Functions

 

Pin Detection

 

This module allows you to detect the voltage of the vehicle OBD II diagnostic socket pins and the supported protocol types to help technicians judge the OBD II diagnostic interface.



A new module ‘MALL’ is now available for all users to expand and upgrade their X-431 PAD VII with more diagnosis software.

 

Heavy-Duty Vehicles (Optional):

 

Compatible with Nissan (Diesel)/ Mitsubishi (Diesel)/ USA Ford Diesel, Kenworth/ Astra, Benz Heavy Duty, Bosch Diesel, China Heavy Duty, Cummins Heavy Duty, DAF, Delphi Diesel/ Denso Diesel, FAW Liberation, Foton Auman, FUSO, Hino, Hyundai Heavy Duty, Isuzu Heavy Duty/ Iveco Heavy Duty, JAC Heavy Duty, Mack, MAN ….

**Need to make an purchase of the heavy-duty vehicle diagnostics software you need.

 

Smart Link C Box

Smartlink C is a new generation intelligent diagnostic box with Linux system independently developed by Launch, which supports multiple communication modes (USB, BT, WIFI) and multiple diagnostic protocols.

It can be used alone as a remote diagnosis box for SmartLink remote diagnosis, or as a pass-thru tool to connect with OEM software. As J2534 Pass Thru Tool, support remote connection with OEM software to complete remote diagnostics, support OEM software of multiple brands

 

Support D-PDU / J2534 / RP1210 diagnostic standard, and cover passenger cars and commercial vehicles at the same time

Support the latest diagnosis protocol of CAN/DOIP / CAN FD

Support 2.4G/5G dual band

Support online upgrade



How to Use SmartLink C as J2534 Passthru?

Download the OEM diagnostic software in Automakers’ Service Webs to your computer. You can reach us to get web sites.

Connect the Smartlink C to your computer with the included USB cable, or via the stable and solid 5G Wi-Fi network.

Connect the Smartlink C to your vehicle’s DLC port with/without the included extended OBDII cable.

Download and install the LAUNCH’s J2534 tool at the LAUNCH official site.

Run the “ J2534 tool ” and there you go.



Smartlink remote diagnosis introduction



SmartLink Remote Diagnostics is a brand new remote diagnostic technology that better links remote assistance demanders with professional technicians through the bridge role of SmartLink remote diagnostic service open platform. Professional technicians can carry out remote diagnostic operations on PCs (with J2534 driver and OEM software installed) to assist in the completion of remote diagnostics after users use SmartLink C connector as a J2534 Pass Thru device and connect it to the Ethernet.





Add-on Features:

Support oscillograph, sensor, battery tester, video scope, endoscope, Wi-Fi printer, TSGUN, X-PROG3 Immobilizer,etc. 
 

This LAUNCH X431 diagnostic tool PAD VII supports 8 extended modules including:

 

• VSP-600 VideoScope: for up-close visual inspections in confined areas.


• X-PROG & X-PROG3 Immobilizer: for lock-smith level key programming & IMMO service.


• S2-2 SensorBox: diagnose and simulate vehicle sensor faults quickly.


• O2-1 ScopeBox, Oscilloscope: quickly acquire the circuit signal, and slowly display the waveform to observe and analyze.


• Wi-Fi Printer: print out diagnostic data & reports.


• X431 TSGUN: activate all sensors, relearn & program LAUNCH sensors.


• BST360 Bluetooth Battery Tester: get a thorough test of the vehicle battery.




 
•  
•  

 

**Need extra costs to buy these 8 extended function modules.

Update your X-431 PAD7 scanner to get FREE 24-hour online technical support.

Service time: 5*24hours, Mon to Fri (Beijing Time, GMT+8)

Software Coverage:

 

Passenger vehicles:

 

1. Australian:  AUST Holden, AUST Ford

 

2. Asian: Toyota Lexus, Honda/Acura, Mazda, Subaru, Nissan Infiniti, Mitsubishi, Hyundai, Isuzu, Daihatsu, KIA, Daewoo, Suzuki, Proton, Tata, Mahindra, Ssangyong, Perodua, Maruti

 

3. European: Audi, Mercedes Maybach, BMW MINI Rolls Royce, VW Bentley Bugatti, Opel Vauxhall, Peugeot, Citroen, Volvo, Sprinter, Renault Dacia, Fiat Romeo Abarth Lancia, Rover, Landrover, Saab, Seat, Skoda, Smart, Maserati, Ferrari, Arston Martin, Porsche, Jaguar

 

4. USA: USA Ford/Lincoln, GM, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Jeep

 

5. Chinese: Changcheng (Great Wall), Geely, Qirui_TY(Cherry), Futian, Changan, Changhe, Haifei ….etc.

 

 

Launch X431 PAD III vs X431 PAD V vs. X431 PAD VII

 

Heavy Duty Vehicles Diagnosis (Optional, software can be purchased in 'Mall'):

Software Coverage:
 

• Nissan (Diesel)


• Mitsubishi (Diesel)


• USA Ford Diesel, Kenworth


• Astra, Benz Heavy Duty,  Bosch Diesel, China Heavy Duty, Cummins Heavy Duty, DAF, Delphi Diesel


• Denso Diesel, FAW Liberation, Foton Auman, FUSO, Hino, Hyundai Heavy Duty, Isuzu Heavy Duty


• Iveco Heavy Duty, JAC Heavy Duty, Mack , MAN , OBD Heavy Duty, Scania, Shangchai Diesel, Volvo Heavy Duty


• WP Diesel, Airbus, Allison Transmission Box, Ashok Rejlander, Bendix ABS, Caterpillar Heavy Duty


• Chai Heavy Vehicle, Chaoyang Diesel, Construction Machinery, CREDO Heavy Vechicle, Detroit Engine


• Dongfeng Commercial Vehicle, Dongfeng Yufeng, Doosan Engine, Freightliner Heavy Duty Truck


• Full Diesel Diagnosis Software, Haldex ABS Heavy Duty, HD_ABS System, HD_GoldenDragon, HD_International


• HD_Kinglong, HD_Maxxforce, HD_Tata, HD_Western_Star, Heavy Truck Presentation Software


• IRISBUS HD, IRIZAR HD, NEOPLAN HD, Peter HD, Renault HD, SETRA HD, Stannic Bavin, Sterling HD


• Sunlong Bus, Sunwin Bus, UD Trucks 2F Nissan Diesel, WABCO ABS, Yang Chai Engine




 
•  
•  

Powerful special functions:

Component Replacement, Cylinder Compression Test, Injector Cut Out Test, DPF Regeneration

Communicates with ABS & Transmissions from Bendix, Wabco and Allison

Tech to Tech remote communication function






































































 

LAUNCH X431 PAD VII PAD7 TABLET SPECIFICATION
Operation System	Android 9.0
CPU	2.0GHz Octa cores
Memory	8GB RAM & 256GB
Display	13.3 inch capacitive screen，1920*1080
Connectivity	Bluetooth/Wi-Fi
Camera(rear)	Front 8mp, Rear 13mp
Interface	DC IN/Micro USB/USB 2.0 Type A/RJ45/HIMI
Power Consumption	≤ 2W
Test Voltage	DC 9～18V
Working Temp	0℃~50℃
Dimensions(W*H*D)	353x236x71(mm)
Smartlink
Display	3.5' touch screen 320*480
Memory	256M
Storage	8GB
Diagnostic Communication	WiFi & BT & USB

 

---

LAUNCH X431 EV Diagnostic Upgrade Kit + Activation Card Compatible with X431 PAD V & PAD VII

 

1. User has already purchased new energy battery pack diagnostic configuration of the X-431 PAD V/X-431 PAD VII from the seller and received the Activation Card of new energy detection expansion package and diagnostic adaptor cables.

2.Choose either of the following methods to activate it on diagnostic scanner.



Method 1 - Via Job Menu

 

1).Update the main diagnostic app of the diagnostic scanner to V7.03.025 (X-431 PAD V) / V7.00.021 (X-431 PAD VII) or above and a new module “New Energy Diagnose” will appear on the Job menu. Refer to figure 1.



2).Tap New Energy Diagnose to enter the following screen. Refer to figure 2.



*Note: Vehicle Diagnosis in figure 2 covers all new energy vehicle diagnostic software included in the original product configuration. See figure 3.



3).Tap Battery Pack Detection, the system will identify whether the current user account has activated the battery pack diagnostic configuration or not.

 

A.If not activated, it will navigate to the Mall module directly. See figure 4. Tap Subscription Renewal Card Pay and enter the 24-digit password to activate it. After it is successfully activated, please go to Software Update to download and install the diagnostic software of the battery pack.



B. If already activated but not downloaded the battery pack diagnostic software, it will go to Software Update to download. See figure 5.



C. If already activated and downloaded the battery pack diagnostic software, it will enter the battery pack brand selection screen. See figure 6.



Method 2 - Via Mall

 

1).Update the main diagnostic app of the diagnostic scanner to V7.03.025 or above and tap Mall on the Job menu. See figure 7.



2).Tap Other Software Packages, and then tap New energy battery pack diagnostic software package to enter figure 8.



3).Tap Subscription Renewal Card Pay to enter figure 9.



4).Tap Subscription Renewal Card Pay, enter the 24-digit password and tap Confirm to activate it. See figure 10 & 11.





5).After it is successfully activated, please go to Software Update to download and install the diagnostic software of the battery pack. See figure 12.



6).After downloading is completed, tap New Energy Diagnose and then tap Battery Pack Detection. The system will enter the battery pack brand selection screen. See figure 6.

 

*Note: All illustrations and descriptions in this operation instruction are based on the latest information available at the time of publication. Due to continuing improvements, actual product may differ slightly from the product described herein.

Package Includes:

 

1pc x Tesla-12+20 connector, RoHS

1pc x Special connector for Tesla airbag repair, RoHS

1pc x (PAD VII) 220V/1.3A, 8-suffix British AC wire, 1M, Pengshengye, RoHS

1pc x OBD16 male to female new energy extension cable, with DC cable, RoHS

1pc x X431 EV MAX battery pack detection 8PIN diagnostic connector, RoHS

1pc x X-431 PAD IV electric control adapter cable 1, RoHS

1pc x X-431 PAD IV electric control adapter cable 10, RoHS

1pc x X-431 PAD IV electric control adapter cable 11, RoHS

1pc x X-431 PAD IV electric control adapter cable 12, RoHS

1pc x X-431 PAD IV electric control adapter cable 2, RoHS

1pc x X-431 PAD IV electric control adapter cable 3, RoHS

1pc x  X-431 PAD IV electric control adapter cable 6, RoHS

1pc x X-431 PAD IV electric control adapter cable 7,RoHS

1pc xX-431 PAD IV electric control adapter cable 8, RoHS

1pc x Battery pack test line 100 models, RoHS

1pc x Battery pack test line 101, RoHS

1pc x Battery pack test line 102, RoHS

1pc x Battery pack test line 103, RoHS

1pc x Battery pack test line 104, RoHS

1pc x Battery pack test line 105, RoHS

1pc x Battery pack test line 106, RoHS

1pc x Battery pack test line 107, RoHS

1pc x Battery pack test line 108, RoHS

1pc xBattery pack test line 109, RoHS

1pc xBattery pack test line 110 models, RoHS

1pc xBattery pack test line 112 models, RoHS

1pc xBattery pack test line 113, RoHS

1pc xBattery pack test line 114, RoHS

1pc xBattery pack test line 115 models, RoHS

1pc x Battery pack test line 116, RoHS

1pc x Battery pack test line 119, RoHS

1pc x1pc x Battery pack test line 124 types, RoHS

1pc xBattery pack test line 126 models, RoHS

1pc x Battery pack test line 127 models, RoHS

1pc x Battery pack test line 130 models, RoHS

1pc x Battery pack test line 152 models, RoHS

1pc x (PAD VII), 8-suffix Australian standard AC wire, 1M, Pengshengye, RoHS

1pc x(PAD VII) 220V/1.3A, 8-suffix European standard AC wire, 1M, Pengshengye, RoHS

1pc x Power adapter, 12V4A, 48W desktop, 8-suffix DC connector 5.5, US standard AC cable, 2M, Pengshengye, RoHS

1pc x New Energy Detection Extension Pack Overseas Configuration Operation Guide, RoHS

1pc x Activation Card

----------------------------------------------------------------------------------------------------------------------------------------
If you have any questions about the device, the price or the payment, please feel free to contact us.

E-Mail:Sales@carTool.co.uk
Skype:carTool.co.uk
Whatsapp: 86-15271813909

Shipping Method & Delivery
1) UK/EU Warehouse Shipping: 2-4 working days with No Tax. We have stock in our UK and EU warehouse for most items. 
2) 4PX Express: 6 days with Tax Free for UK customers.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express: 10-12 working days for European Countries. Our company have IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax, So usually no tax or extra fee for EU customers.
4) DHL Shipping: 3-5 working days. For the items have no stock in UK warehouse, we will ship it by DHL.  We will declare a lower price on the invoice to help your clearance. 

If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: sales@cartool.co.uk

Technical Support
If you cannot download software in the default CD, or if you need technical support for software install, please send email to sales@cartool.co.uk, we will help you by Teamviewer.