D3 is short for Digimaster 3 or Digimaster III is a original universal odometer correction tool. Digimaster works with various types of adapters, you can easily achieve odometer correction, audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz & BMW etc.
Newest Version with 200 Tokens for new models: V1.8.1707.21
Best Quality V4.94 Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range of vehicle. V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88.
V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88. Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle.
Tacho Pro 2008 July Version is the most popular programming-device for digital speedometers worldwide. The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation.
Original Digimaster 3 also is called Digimaster III or shortly D3
1.It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc
2. CAS4+ CPU 1N35H read and write function for BMW year after 2014
Digimaster 3 Digimaster III Original Odometer Correction Master with 980 Tokens
1. Original Yanhua Brand with High Quality.
2. It is new developed odometer correction master.
3. It support English and Online update.
4. It contains the advanced technology of programming new keys for BMW and Benz, CAS-BDM reading/writing and resetting.
ST59 Plug works together with DIGIPROG3, used on vehicles with NEC chips, like Ford, Renault and so on.
We use solution to make this ST59 plug, has been tested by different countries customer.
Easy connect and operation.
CAS3/912X/9S12X in Circuit Programmer works with Motorola/Freescale's HC12, HCS12, HCS12X secured microcontrollers! It connects to PC by USB. You needn't remove the micro from the board, just connect 7 pins will be ok.
Audi VW micronas and Fujitsu programmer 2.0 replaces the R200 and R250 fully function.
CAS BDM Programmer used to read and program BMW CAS 1/2/3/3+/4, and BENZ series EIS CPU data. CAS BDM Programmer works together with Digimaster 3, CKM100 or CKM200.
Note: this cas bdm programmer doesn't support 5m48h chip.
NEC Programmer is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen,Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car’s computer or correct the odometer reading.
The tms370 is the lowest cost programmer for TI TMS micro controller development, car radios and car dashboards programming.
TMS370 Programmer is mainly used for car radio decoding, car odometer adjusting and IMMO Pin code reading.
Fiat KM tool is a mileage programmer for Fiat, if program Fiat KM via OBD2.
DigiMaster 18 is a programming machine with multifunction can connect computer through the USB access. Apart from the ordinary functions, there are special models function. DigiMaster 18 support most cars before 2008, and few cars after 2008.
This CAN Filter 18 in 1 for Benz / BMW universal filter should be added to the car after odometer adjustment for most chassis models. But for W222/W205/W447 models, CAN filters should be added before odometer adjustment.
Smelecom USA PROG Full package is the best odometer correction tool for USA cars. USA Prog Full Package is very easy to use, and can be updated online via USB 2.0 port. USA PROG supportsVW/AUDI 2007+.
500 Tokens for Digimaster 3/CKM100 Plus One YH BMW FEM/BDC Key Programmer