Car ECU Chiptuning refers to changing or modifying an EEPROM chip in a car's or other vehicle's electronic control unit (ECU) to achieve better performance, whether it be more power, cleaner emissions, or better fuel economy.
Are you still confused about looking for a good and suitable one?
The ECU remap flasher tools we supply include Alientech KESS V2, KTAG, Carprog, SMPS MPPS EDC16, Xprog-m programmer, KWP2000+, Galletto 1260, BDM100 and more.
Join in us, carsets.co.uk supply you cost-effective Eeprom Programmer and ECU Chiptuning Tool.
PCMtuner is a customized read-write device specially used for vehicle engine control system(ECU) and transmission control system(TCU).It can support OBD( bus reading and writing)BENCH(read and write without opening ECU or TCU box).BOOT(read and write with open mode).
Stand-alone software and hardware.
No Token, No Annual fee, No subscription.
Have all GM protocols, OBD read ECM and TCM. All work in OBD, no need damaos for GM cars.
With VCM Suite for the most comprehensive scanning, logging and calibration tools on the market.
GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. It is used for short-circuiting OBD2 in the car for anti-theft activation matching, ECU diagnosis and programming connection, and drawing power from the vehicle’s battery for outdoor on-site vehicle maintenance.
Cartool.co.uk offer you value bundles for Kess V5.017 Euro Version Red PCB and K-tag V7.020 Red PCB Euro Version. Both of the Red Kess and Ktag support online connection, no tokens need, with newest ksuite V2.23 software.
The OpenPort 2.0 combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.
Best Choice for Engineers or Automotive Workshop:
with GODIAG GT100, can support communication detection and ECU maintenance/diagnosis /programming /coding, will make your work more simple and easier, save your time and money.
with GODIAG BMW CAS4 CAS4+ Test Platform, can support BMW CAS4 CAS4+ All Key Lost,Add New Key,Synchronize Test and Troubleshooting.
with GODIAG FEM BDC Test Platform, can support to program new key when all keys lost, can add new key to BMW FEM BDC vehicle on bench.
Work with AUTEL IM508, IM608, VVDI2, VVDI KEY TOOL PLUS, CGDI BMW, Lonsdor K518ISE etc.
The package includes PCMTuner ecu chip tuning tool and Kess v2 firmware 5.017 ksuite 2.80 red pcb online version and Ktag firmware 7.020 software 2.25 with red pcb, buy them together and you can save a lot, money! W offer you a lifetime customer service and tech support. SF347 Full Protocol OBD2 Jumper Cable as Gift
This is bundle deal for V86 Iprog+, Probes Adapters, IPROG Plus PCF79xx SD-Card Adapter and Universal RDIF Adapter
Complete Package to make your job much easier!
CG Pro 9S12 full version with all adapters, the next generation of CG-100, can perform automatic conversion BMW, Mercedes-Benz kilometer and BMW, Land Rover, Porsche key matching. It combines both CGDI Pro BMW MSV80 key programmer and CGDI Pro Mercedes key programmer. In another word, it is cgdi100-cgdi mb- cgdi bmw. 3in one cgdi pro.
Godiag GT100 OBDII 16PIN Protocol Detector & Break Out ECU Connector with Good Quality
Dongle contains 67 software modules.
Compatible with Old KTM BENCH, KTM100, KTMOBD, Original Scanmatik2 Pro.
Ktag V7.020 EU Version Red PCB Plus Mercedes ME9.7 and Mercedes Benz ECU ME9.7/272-273/ Renew Cable
Newest Firmware V10.93 CARPROG, with All 21 Adapters, contain much more authorization than V4.74 or other low version CARPROG. Software needs activation but you will automatically get token renew after it used up.
FGTech Galletto 4-Master this new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use by anyone. Our system comes furnished complete with all Car, Truck, Motorbyke, Marine, BDM MPCxx , BDM Boot Mode Tricore, checksum.
MPPS V21MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
Warranty: one year
Package comes with Breakout Tricore cable.
Orange 5 V1.34 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.
Newest MPPS V16.1.02 is professional ecu chip tuning tool, it is completely working through obd2 port, no need soldering or connecting cables, easy and high efficiency.
Iprog+ Programmer Support IMMO + Mileage Correction till the year 2019 Better than Carprog Full
V87 Iprog+ Pro is very powerful.
CGDI AT-200 supports ECU Data reading, writing and clone, such as, MSV90 MSD85 MSD87 N2055 B38 B48.
Supports IMMO functions and ISN code reading by OBD.
More than 3000 ECU can be supported ,not just BMW.
XPROG-M V6.12 ECU Programmer With USB Dongle, No need activation.
With new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9.