The ultimate LAUNCH X431 PAD VII Elite is an unexpected high-end diagnostic tool from LAUNCH, comes with the ADAS calibration function, 60+ service functions, TPMS service, and 8 extended modules functions. New Smartlink C VCI powers technicians a new diagnostic level without the limitation of diagnostic functions, tools, and vehicle types
Launch X431 V+ with Bluetooth/Wifi based on Android system, is a new car malfunction diagnostic device developed by Launch Tech for internet application. X-431 V+ completely substitutes X431 IV and X431 Diagun III. It passes on Launch advantages in car fault diagnostic technology, such as vast car model coverage, powerful test function, special function and accurate tast data, etc., X-431 V+ achieves the full car model and full system fault diagnosis through the bluetoooth communication between DBSCar connector and intelligent mobile terminal.
Launch X431 PRO Elite is the new released all-in-one automotive car diagnostic scan tool with CANFD DOIP, Read ECU, Full System, 32+ Resets, Key Program, VAG Guide and ect. At a lower cost, Launch obd2 scanner X431 PRO ELITE combines all the hot functions of comprehensive scanners according to the customer's favorite need.
Launch X431 key programmer remote make is able to read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions.
Launch X-431 ECU & TCU Programmer supports ECUs data reading & writing quickly, including reading the chip ID and backing up the EEPROM data, backing up the FLASH data and restoring EEPROM/FLASH data.
Checksum Correction Function: Ensure the validity of ECU data. When you write data to a new ECU, it will automatically check the data for you to ensure that the ECU can function properly.
LAUNCH X431 CRP 919E BT is a new generation of 7-inch automotive intelligent diagnostic equipment with superior hardware and super performance. The host adopts 2.0Ghz 4-core high-efficiency processor and 4GBRAM+64GBROM large storage based on Android 10.0 system and is equipped with a high-endurance battery, which make diagnosis faster, more stable and more durable; the product equips with the latest DBScar VII Bluetooth diagnostic connector on the basis of CRP 919E.
As the classic Launch X431 product, LAUNCH X431 PRO3S+ V5.0 optimized hardware configuration, it provides OE-Level functions, such as Guiding Functions(compatible with VW, SKODA, SEAT) and variant Coding.
X431 PRO3S+ V5.0 has wider vehicle coverage, supports AutoAuth for FCA SGW, can work with Launch Heavy Duty Modules, to diagnose gasoline & 24v diesel trucks(Heavy Duty Modules need buy extra, package not included) .
OE-LEVEL ALL system Diagnostic VINscan quick test and manual diagnosis are available. Support all system diagnosis of passenger car Diagnosis functions include: Read DTCs, Clear DTCs, Read Data Stream, Special Functions, actuation test, ECU online coding, etc.
The newest Launch X431 PRO5, the innovative revolution of intelligent diagnosis. It opens the era of dual diagnostic modes (local diagnosis and SmartLink remote diagnosis). X-431 PRO 5 not only inherits the powerful diagnostic strength of PRO series, greatly developed its advantages like J2534 Programming, 50+ Reset Functions, Bi-directional Control, Online Functions, ECU Coding, All System Full-Function Diagnostics, etc, but also supports SmartLink 2.0 remote diagnosis and specialized detection equipment, with features not limited to the diagnostic functions of the device under control.
Launch X431 Immo Plus key programmer is a new generation of 8-inch automobile special IMMO matching tool with high configuration and super performance. The host is developed based on the Android 10.0 open system, adopts a 2.0Ghz 4-core high-efficiency processor, 4GBRAM+64GBROM large storage, and is equipped with a high-endurance battery, which make the diagnosis faster, more stable and more durable.
NEWEST LAUNCH PRO3S+ SmartLink HD Advanced Bidirectional Scan Tool Compatible With 12V&24V Vehicles. Design for Passenger&Commercial Vehicles 2 in 1, work for Cars/ Trucks/ buses/ trailers/ excavators/ diesel engine/ pick-up etc. Support Topology Map, 60+Service, ECU Coding, CANFD &DOIP.
Support diagnose vehicles from 12V to 24 V. X-431 PRO3S+ has an extensive vehicle coverage for 110+ worldwide passenger models and 100+ Commercial models.
TOP VCI Smartlink C2.0 with J2534 Reprogramming,Upgrade Topology,New Energy Battery Pack,8+ High-end functions,Super Remote Diagnostics.
This is only two years Renewal Card Sevice for All Launch X431 12V Car Diagnostic Software. With this service to extend another 2 years free update. No need shipping.
Suitable For Products: LAUNCH X431 Diagun IV, X431 Diagun V, X431 V, X431 V+, X431 Pro mini, X431 Pros mini, X431 PRO3S+, X431 PRO 5, PRO3 APEX...
LAUNCH ADAS Software Activation Card activates ADAS Static Calibration function for any LAUNCH X-431 Pro and PAD series scan tool enabling your diagnostic tool to perform calibration functions using any LAUNCH ADAS PRO and Mobile equipment, it can also compatible with other competitor ADAS devices. LAUNCH ADAS Software Activation Card enables calibration functions on other ADAS target equipment, which are designed to create a safer environment for the driver and those around him.
This is only 2 years update service for Launch X431 IMMO Activation (LAUNCH IMMO Function Authorization) on PAD VII,PAD V/ PAD V Elite,PRO5, PRO ELITE and so on. No need shipping.
For the anti-theft function: PAD V/ PAD VII/ PRO5 with IMMO Activation software = IMMO PLUS, which more cost-effective upgrades service to help every auto mechanic, DIYer, etc. expand your business!!
Launch X431 PAD VII Elite is an unexpected high-end diagnostic tool from LAUNCH, comes with 13.3" touch screen and 39 service functions, the compatible with ADAS calibration function, TPMS service and 8 extended modules. The new SmartLink C VCI powers you a new diagnostic level without the limitation of diagnostic tool.
With 1 free Launch CRP123X as gift.
Promotion Period: Sep 14th - Oct 31st.
LAUNCH X431 PRO3 V+ 5.0 Elite based on Android 10.0 system, has been upgraded both in terms of software and hardware, and has more outstanding performance than the X431 PROS V 5.0 and V+ V5.0.
LAUNCH scan tool X431 PRO3 V+ ELITE has inherited all the strengths of its predecessors and greatly developed its advantages like J2534 Programming, 50+ Reset Functions, Bi-directional Control, Online Functions, ECU Coding, All System Full-Function Diagnostics, etc.
Creader TPMS 5011 V2 is an intelligent tire pressure system detection terminal based on Android operating system, suitable for tire pressure systems of multiple models of vehicles. It has the functions of TPMS sensor activation, reading, diagnosis, learning and programming. Moreover, it can connect to Wi-Fi for one-click upgrade.
LAUNCH CRP919 EV is an intelligent and networkable diagnostic tool based on the Android platform, with full system and full functions that best meet the needs of the new energy DIY market. It covers software for more than 120 models. The functions of the product include code reading, code clearing, version information, data stream reading, action test, and coding. It also has 38 special functions and 2 battery packs.
CRP129 HD is a diagnostic tool with internet access for Heavy-Duty Vehicles, supporting the basic diagnostic of 50+ car makes software, supporting the full-on diagnostic functions of the all systems.
CRP129 HD heavy duty truck scan tool's major advantages: All System Diagnosis, 7 Resets, Full HD OBD/EOBD2, Auto VIN&Scan, 4-IN-1 Live Data Graphing, Online Feedback & Remote Assistance, Upgraded Hardware and etc.
LAUNCHX-431 PRO ELITE is an 8-inch smart car diagnostic device developed based on Android 10.0 system. It adopts 2.0Ghz 4-core high-efficiency processor, 4GB RAM+64GB ROM large storage, and is equipped with a high-endurance battery, which runs faster, more stably and lasts longer.
X-431 PRO3 ACE is a 10.1-inch advanced smart car diagnostic device developed based on Android 10.0 system. It is equipped with a 2.0Ghz 4-core high-efficiency processor, 4GB RAM + 64GB ROM large storage, and is equipped with a high-endurance battery. It runs faster, more stably and lasts longer. It not only supports passenger car diagnosis but also supports commercial vehicle expansion modules, making the diagnostic function more powerful.