UK/EU Ship Lifetime Free Update LAUNCH CRT5011E Newest TPMS Relearn Tool Support 315/ 433MHz TPMS Sensor, Read/Activate/Programming/Relearn/Reset/Key Fob Test

 

LAUNCH CRT5011E is a professional TPMS diagnostic tool that integrates TPMS sensor activation, reading, learning and programming. It can activate and read tire pressure sensor information through high or low radio frequency and uses the OBD interface to reset the TPMS modules. Moreover, it can program the sensor by receiving a high frequency of 315MHz/433MHz.

 

• LAUNCH CRT5011E is apowerful and versatile tpms & obdii 2-in-1 tool. 
• Launch CRT5011E can program the sensor by receiving multi-frequency 315MHz/433MHz.Only supportLAUNCH Sensor.
• LAUNCH CRT5011E TPMS Relearn Tool can easilyactivate most of the known OEM TPMS sensors.
• Free Lifetime Upgraded, You can update your CRT5011E from your PC at any time without any cost
• Besides writing the Sensor ID into ECU, it can read sensor ECU ID from TPMS. CRT5011E also supports the diagnosis of 99% of the models on the market.
• CRT5011E tpms tool supports 10 languages: English, French, Russian, German, Italian, Japanese, Korean, Spanish, Portuguese, Chinese. You can configure the system language of the tool to your preference language.

• Auto Create: This function is designed to program the LAUNCH-sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. Select the wheel which needs to be programmed on the tool, places a LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE SENSOR to create a new random sensor ID.
• Manual Create: This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available.
• Copy ID by activation: It can get tire pressure sensor ID when the tire sensor is working normally, you can write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered.
• Copy by OBD: Firstly, you need to perform a Read ID from Vehicle in the Relearn function, which reads the sensor ID from the vehicle ECU. It can be used if the sensor is damaged and the original ID is saved in the vehicle system. You can use it to get the old sensor ID stored in ECU, and write it directly into your LAUNCH RF-sensor.
• Create Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time.

• Activate and match with all 315 MHz / 433 MHz tire pressure sensors
• Reset,relearn*and reprogram tire pressure sensors fast.
• ("relearn" is write new sensor ID to the vehicle's ECU, but Some models need to work with the X431 tablet seriesin order to be written to. Such as PRO ELITE or CRP 919X BT.)
• Diagnose the tire pressure issues and turn off the warning light by relearning and programming your new tire pressure sensor.
• Reprogramming LAUNCH LTR01/LTR03 sensors, Please choose LAUNCH LTR03 sensors here
• Read tire pressure, tire temperature and battery status accurately
• Reprogram up to 8 sensors at one time
• Provide TPMS relearning procedures and sensor OE number lookup
• Multiple ID generation methods: Automatic creation/Manual creation/Copy ID by Activation/Copy by OBD/Creat Multi-sensor (1-8)

Auto Create: This function is designed to program the LAUNCHsensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. 
Select the wheel which needs to be programmed on the tool, place a LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE SENSOR to create a new random sensor ID.
Manual Create: This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available.
Copy ID by activation: It can get tire pressure sensor ID when the tire sensor is working normally, you can write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered.
Copy by OBD: Firstly, you need to perform a Read ID from Vehicle in the Relearn function, which reads the sensor ID from the vehicle ECU. It can be used if the sensor is damaged and the original ID is 
saved in the vehicle system. You can use it to get the old sensor ID stored in ECU, and write it directly into your LAUNCH RF-sensor.
Creat Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time. Stationary Relearn: Require the vehicle to be placed in the “Learn Mode”, follow the screen instruction to activate sensors, and perform stationary relearn.
OBDII Relearn: Allow the CRT5011E to directly write TPMS sensor IDs to the TPMS module via the OBD connector.
Auto Relearn: You can complete relearning by driving and refer to the on-screen Relearn Procedure for the exact details of the process.
Due to different car models, OBDII Relearn, Stationary Relearn, and Auto Relearn may not exist at the same time. Some models have all 3 relearn methods, but some models may only have one or two relearn methods. Relearn Procedure: Relearn operation applies only when the newly programmed sensor IDs are different from the original sensor IDs stored in the vehicle's ECU. Relearn is used to 
write the newly programmed sensor IDs into the vehicle’s ECU for sensor recognition.
Part number lookup: It allows you to check the OE number of the sensors. Package Includes:

1pc x LAUNCH CRT5011E host
1pc x card reader
1pc x charger
1pc x USB cable
1pc x black bag
1pc x EU-standard adapter
1pc x US-standard adapter